Add defconfig fragments for am625 based beagleplay and corresponding customized environment file for beagleplay.
Signed-off-by: Nishanth Menon nm@ti.com --- Changes Since V4: * New bootstd baseline * have'nt picked up Mattijs's review as a result
V4: https://lore.kernel.org/r/20230822184135.2328409-8-nm@ti.com V3: https://lore.kernel.org/all/20230815164440.2713726-4-nm@ti.com/ V2: https://lore.kernel.org/u-boot/20230727234446.3651836-4-nm@ti.com/ V1: https://lore.kernel.org/all/20230725185253.2123433-6-nm@ti.com/ board/ti/am62x/beagleplay.env | 18 +++++++++ board/ti/am62x/beagleplay_a53.config | 55 ++++++++++++++++++++++++++++ board/ti/am62x/beagleplay_r5.config | 15 ++++++++ 3 files changed, 88 insertions(+) create mode 100644 board/ti/am62x/beagleplay.env create mode 100644 board/ti/am62x/beagleplay_a53.config create mode 100644 board/ti/am62x/beagleplay_r5.config
diff --git a/board/ti/am62x/beagleplay.env b/board/ti/am62x/beagleplay.env new file mode 100644 index 000000000000..73a078b93009 --- /dev/null +++ b/board/ti/am62x/beagleplay.env @@ -0,0 +1,18 @@ +#include <env/ti/ti_common.env> +#include <env/ti/mmc.env> + +name_kern=Image +console=ttyS2,115200n8 +args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 +run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +set_led_state_fail_load= led led-0 off; led led-1 on; + led led-2 off; led led-3 on; led led-4 off +set_led_state_start_load=led led-0 on; led led-1 off; + led led-2 on; led led-3 off; led led-4 on +boot=mmc +mmcdev=1 +bootpart=1:1 +bootdir=/boot +boot_targets=mmc1 mmc0 usb pxe +bootmeths=extlinux efi +rd_spec=- diff --git a/board/ti/am62x/beagleplay_a53.config b/board/ti/am62x/beagleplay_a53.config new file mode 100644 index 000000000000..f0380416cc5e --- /dev/null +++ b/board/ti/am62x/beagleplay_a53.config @@ -0,0 +1,55 @@ +# Defconfig fragment to apply on top of am62x_evm_a53_defconfig + +CONFIG_DEFAULT_DEVICE_TREE="k3-am625-beagleplay" +CONFIG_OF_LIST="k3-am625-beagleplay" +CONFIG_SPL_OF_LIST="k3-am625-beagleplay" +CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_EXT4_WRITE=y +CONFIG_LZO=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" +CONFIG_AUTOBOOT_DELAY_STR="d" +CONFIG_AUTOBOOT_STOP_STR=" " +# Use the Beagleplay env file +CONFIG_ENV_SOURCE_FILE="beagleplay" +# Do not use emmc boot - we will use FS only +CONFIG_SUPPORT_EMMC_BOOT=n +CONFIG_MMC_IO_VOLTAGE=y +# CONFIG_SPL_MMC_IO_VOLTAGE is not set +CONFIG_MMC_UHS_SUPPORT=y +# CONFIG_SPL_MMC_UHS_SUPPORT is not set +CONFIG_MMC_HS200_SUPPORT=y +# CONFIG_SPL_MMC_HS200_SUPPORT is not set +# Enable GPIO control +CONFIG_DM_GPIO=y +CONFIG_SPL_GPIO=y +CONFIG_DA8XX_GPIO=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPIO_READ=y +# Enable LEDs +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_SPL_LED=y +CONFIG_SPL_LED_GPIO=y +# Enable I2C bus +CONFIG_SPL_I2C=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_OMAP24XX=y +CONFIG_CMD_I2C=y +# Regulator +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_CMD_REGULATOR=y +CONFIG_DM_REGULATOR_TPS65219=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_TPS65219=y +CONFIG_CMD_PMIC=y +# Uses Realtek phy rather than TI phy +CONFIG_PHY_TI_DP83867=n +CONFIG_PHY_REALTEK=y +# No SPI flash on Beagleplay +CONFIG_SPI=n +CONFIG_SPI_FLASH=n +CONFIG_SPL_DM_SPI_FLASH=n +CONFIG_SPL_SPI_FLASH_SUPPORT=n diff --git a/board/ti/am62x/beagleplay_r5.config b/board/ti/am62x/beagleplay_r5.config new file mode 100644 index 000000000000..4ee0375a2a1d --- /dev/null +++ b/board/ti/am62x/beagleplay_r5.config @@ -0,0 +1,15 @@ +# Defconfig fragment to apply on top of: +# am62x_evm_r5_defconfig +# +CONFIG_DEFAULT_DEVICE_TREE="k3-am625-r5-beagleplay" +CONFIG_OF_LIST="k3-am625-r5-beagleplay" +CONFIG_SPL_OF_LIST="k3-am625-r5-beagleplay" +# Do spl board init +CONFIG_SPL_BOARD_INIT=y +# Do not use emmc boot - we will use FS only +CONFIG_SUPPORT_EMMC_BOOT=n +# No SPI flash on Beagleplay +CONFIG_SPI=n +CONFIG_SPI_FLASH=n +CONFIG_SPL_DM_SPI_FLASH=n +CONFIG_SPL_SPI_FLASH_SUPPORT=n