This patch adds pinctrl node with default pin state for mt7628an.dtsi.
Signed-off-by: Weijie Gao weijie.gao@mediatek.com --- arch/mips/dts/mt7628a.dtsi | 150 +++++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+)
diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi index 6d2142f429..8afea1865d 100644 --- a/arch/mips/dts/mt7628a.dtsi +++ b/arch/mips/dts/mt7628a.dtsi @@ -57,6 +57,156 @@ u-boot,dm-pre-reloc; };
+ pinctrl: pinctrl@60 { + compatible = "mediatek,mt7628-pinctrl"; + reg = <0x3c 0x2c>, <0x1300 0x100>; + reg-names = "gpiomode", "padconf"; + + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pin_state { + }; + + spi_single_pins: spi_single_pins { + groups = "spi"; + function = "spi"; + }; + + spi_dual_pins: spi_dual_pins { + spi_master_pins { + groups = "spi"; + function = "spi"; + }; + + spi_cs1_pin { + groups = "spi cs1"; + function = "spi cs1"; + }; + }; + + uart0_pins: uart0_pins { + groups = "uart0"; + function = "uart0"; + }; + + uart1_pins: uart1_pins { + groups = "uart1"; + function = "uart1"; + }; + + uart2_pins: uart2_pins { + groups = "uart2"; + function = "uart2"; + }; + + i2c_pins: i2c_pins { + groups = "i2c"; + function = "i2c"; + }; + + ephy_iot_mode: ephy_iot_mode { + ephy4_1_dis { + groups = "ephy4_1_pad"; + function = "digital"; + }; + + ephy0_en { + groups = "ephy0"; + function = "enable"; + }; + }; + + ephy_router_mode: ephy_router_mode { + ephy4_1_en { + groups = "ephy4_1_pad"; + function = "analog"; + }; + + ephy0_en { + groups = "ephy0"; + function = "enable"; + }; + }; + + sd_iot_mode: sd_iot_mode { + ephy4_1_dis { + groups = "ephy4_1_pad"; + function = "digital"; + }; + + sdxc_en { + groups = "sdmode"; + function = "sdxc"; + }; + + sdxc_iot_mode { + groups = "sd router"; + function = "iot"; + }; + + sd_clk_pad { + pins = "sd_clk"; + drive-strength-4g = <8>; + }; + }; + + sd_router_mode: sd_router_mode { + sdxc_router_mode { + groups = "sd router"; + function = "router"; + }; + + sdxc_map_pins { + groups = "gpio0", "i2s", "sdmode", \ + "i2c", "uart1"; + function = "gpio"; + }; + + sd_clk_pad { + pins = "gpio0"; + drive-strength-28 = <8>; + }; + }; + + emmc_iot_8bit_mode: emmc_iot_8bit_mode { + ephy4_1_dis { + groups = "ephy4_1_pad"; + function = "digital"; + }; + + emmc_en { + groups = "sdmode"; + function = "sdxc"; + }; + + emmc_iot_mode { + groups = "sd router"; + function = "iot"; + }; + + emmc_d4_d5 { + groups = "uart2"; + function = "sdxc d5 d4"; + }; + + emmc_d6 { + groups = "pwm1"; + function = "sdxc d6"; + }; + + emmc_d7 { + groups = "pwm0"; + function = "sdxc d7"; + }; + + sd_clk_pad { + pins = "sd_clk"; + drive-strength-4g = <8>; + }; + }; + }; + watchdog: watchdog@100 { compatible = "ralink,mt7628a-wdt", "mediatek,mt7621-wdt"; reg = <0x100 0x30>;