Do this by using $(SPL_) in Makefiles and CONFIG_IS_ENABLED in C code. This ensures the files and features are only built into the right build for which they are enabled. Using the macros to simplify this patch was made possible by the config symbol rename done in the last patch.
Signed-off-by: Andrew F. Davis afd@ti.com --- drivers/Makefile | 3 +-- drivers/dfu/Makefile | 12 ++++++------ include/dfu.h | 10 +++++----- 3 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile index 7fe80b1d72..26e4d39df6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -2,6 +2,7 @@
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ obj-$(CONFIG_$(SPL_TPL_)DM) += core/ +obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/ obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/ obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ @@ -48,7 +49,6 @@ obj-$(CONFIG_SPL_USB_ETHER) += net/phy/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ -obj-$(CONFIG_SPL_DFU) += dfu/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ @@ -85,7 +85,6 @@ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_NVME) += nvme/ obj-y += pcmcia/ -obj-y += dfu/ obj-$(CONFIG_X86) += pch/ obj-y += phy/allwinner/ obj-y += phy/marvell/ diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index 56f9b0c5f4..4164f342ac 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -3,9 +3,9 @@ # Copyright (C) 2012 Samsung Electronics # Lukasz Majewski l.majewski@samsung.com
-obj-$(CONFIG_DFU) += dfu.o -obj-$(CONFIG_DFU_MMC) += dfu_mmc.o -obj-$(CONFIG_DFU_NAND) += dfu_nand.o -obj-$(CONFIG_DFU_RAM) += dfu_ram.o -obj-$(CONFIG_DFU_SF) += dfu_sf.o -obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o +obj-$(CONFIG_$(SPL_)DFU) += dfu.o +obj-$(CONFIG_$(SPL_)DFU_MMC) += dfu_mmc.o +obj-$(CONFIG_$(SPL_)DFU_NAND) += dfu_nand.o +obj-$(CONFIG_$(SPL_)DFU_RAM) += dfu_ram.o +obj-$(CONFIG_$(SPL_)DFU_SF) += dfu_sf.o +obj-$(CONFIG_$(SPL_)DFU_TFTP) += dfu_tftp.o diff --git a/include/dfu.h b/include/dfu.h index fbe978abdc..9340a900a2 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -202,7 +202,7 @@ static inline void dfu_set_defer_flush(struct dfu_entity *dfu) int dfu_write_from_mem_addr(struct dfu_entity *dfu, void *buf, int size);
/* Device specific */ -#ifdef CONFIG_DFU_MMC +#if CONFIG_IS_ENABLED(DFU_MMC) extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s); #else static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, @@ -213,7 +213,7 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, } #endif
-#ifdef CONFIG_DFU_NAND +#if CONFIG_IS_ENABLED(DFU_NAND) extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s); #else static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, @@ -224,7 +224,7 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, } #endif
-#ifdef CONFIG_DFU_RAM +#if CONFIG_IS_ENABLED(DFU_RAM) extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s); #else static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, @@ -235,7 +235,7 @@ static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, } #endif
-#ifdef CONFIG_DFU_SF +#if CONFIG_IS_ENABLED(DFU_SF) extern int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, char *s); #else static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, @@ -259,7 +259,7 @@ static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, * * @return 0 on success, otherwise error code */ -#ifdef CONFIG_DFU_TFTP +#if CONFIG_IS_ENABLED(DFU_TFTP) int dfu_tftp_write(char *dfu_entity_name, unsigned int addr, unsigned int len, char *interface, char *devstring); #else