Make microblaze's board.c checkpatch clean.
Signed-off-by: Andreas Bießmann andreas.devel@googlemail.com
--- Changes in v2: None
arch/microblaze/lib/board.c | 64 +++++++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index a7c2f76..846ffe1 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -71,15 +71,15 @@ void board_init_f(ulong not_used) { bd_t *bd; init_fnc_t **init_fnc_ptr; - gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET); - bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ + gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET); + bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - GENERATED_BD_INFO_SIZE); #if defined(CONFIG_CMD_FLASH) ulong flash_size = 0; #endif asm ("nop"); /* FIXME gd is not initialize - wait */ - memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE); - memset ((void *)bd, 0, GENERATED_BD_INFO_SIZE); + memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); + memset((void *)bd, 0, GENERATED_BD_INFO_SIZE); gd->bd = bd; gd->baudrate = CONFIG_BAUDRATE; bd->bi_baudrate = CONFIG_BAUDRATE; @@ -105,57 +105,56 @@ void board_init_f(ulong not_used) * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off * as our monitory code is run from SDRAM */ - mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN); + mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
serial_initialize();
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - WATCHDOG_RESET (); - if ((*init_fnc_ptr) () != 0) { - hang (); - } + WATCHDOG_RESET(); + if ((*init_fnc_ptr) () != 0) + hang(); }
#ifdef CONFIG_OF_CONTROL /* For now, put this check after the console is ready */ - if (fdtdec_prepare_fdt()) { - panic("** CONFIG_OF_CONTROL defined but no FDT - please see " - "doc/README.fdt-control"); - } else + if (fdtdec_prepare_fdt()) + panic( + "** CONFIG_OF_CONTROL defined but no FDT - please see doc/README.fdt-control"); + else printf("DTB: 0x%x\n", (u32)gd->fdt_blob); #endif
- puts ("SDRAM :\n"); - printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF"); - printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF"); - printf ("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE); + puts("SDRAM :\n"); + printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF"); + printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF"); + printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
#if defined(CONFIG_CMD_FLASH) - puts ("Flash: "); + puts("Flash: "); bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; flash_size = flash_init(); if (bd->bi_flashstart && flash_size > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM - print_size (flash_size, ""); + print_size(flash_size, ""); /* * Compute and print flash CRC if flashchecksum is set to 'y' * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ if (getenv_yesno("flashchecksum") == 1) { - printf (" CRC: %08X", - crc32(0, (const u8 *)bd->bi_flashstart, - flash_size) + printf(" CRC: %08X", + crc32(0, (const u8 *)bd->bi_flashstart, + flash_size) ); } - putc ('\n'); + putc('\n'); # else /* !CONFIG_SYS_FLASH_CHECKSUM */ - print_size (flash_size, "\n"); + print_size(flash_size, "\n"); # endif /* CONFIG_SYS_FLASH_CHECKSUM */ bd->bi_flashsize = flash_size; bd->bi_flashoffset = bd->bi_flashstart + flash_size; } else { - puts ("Flash init FAILED"); + puts("Flash init FAILED"); bd->bi_flashstart = 0; bd->bi_flashsize = 0; bd->bi_flashoffset = 0; @@ -163,10 +162,10 @@ void board_init_f(ulong not_used) #endif
/* relocate environment function pointers etc. */ - env_relocate (); + env_relocate();
/* Initialize stdio devices */ - stdio_init (); + stdio_init();
/* Initialize the jump table for applications */ jumptable_init(); @@ -190,13 +189,14 @@ void board_init_f(ulong not_used)
/* main_loop */ for (;;) { - WATCHDOG_RESET (); - main_loop (); + WATCHDOG_RESET(); + main_loop(); } }
-void hang (void) +void hang(void) { - puts ("### ERROR ### Please RESET the board ###\n"); - for (;;) ; + puts("### ERROR ### Please RESET the board ###\n"); + for (;;) + ; }