Replace the PCI IO access with PCI memory access, the card supports both, but the former does not work with QEMU SH4.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Daniel Schwierzeck daniel.schwierzeck@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com --- Note: It would be good to test this on the mips malta --- drivers/net/pcnet.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c index e7d6c8d714..34a5a16cfe 100644 --- a/drivers/net/pcnet.c +++ b/drivers/net/pcnet.c @@ -179,14 +179,14 @@ int pcnet_initialize(bd_t *bis) /* * Setup the PCI device. */ - pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &bar); - dev->iobase = pci_io_to_phys(devbusfn, bar); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar); + dev->iobase = pci_mem_to_phys(devbusfn, bar); dev->iobase &= ~0xf;
PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%lx: ", dev->name, devbusfn, (unsigned long)dev->iobase);
- command = PCI_COMMAND_IO | PCI_COMMAND_MASTER; + command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; pci_write_config_word(devbusfn, PCI_COMMAND, command); pci_read_config_word(devbusfn, PCI_COMMAND, &status); if ((status & command) != command) {