Hi Peng,
On Tue, Oct 22, 2019 at 12:30 AM Peng Fan peng.fan@nxp.com wrote:
add phy-reset-gpios to reset phy Add board_phy_config to configure phy Enable DM_ETH
Signed-off-by: Peng Fan peng.fan@nxp.com
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4 ++++ board/freescale/imx8mm_evk/imx8mm_evk.c | 37 +++++++++++++++++++++++++++++++++ configs/imx8mm_evk_defconfig | 7 +++++++ include/configs/imx8mm_evk.h | 8 +++++++ 4 files changed, 56 insertions(+)
diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi index f62a7cf97d..3502602fbb 100644 --- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi @@ -113,3 +113,7 @@ &pinctrl_pmic { u-boot,dm-spl; };
+&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
This does not seem to be U-Boot specific information.
I would suggest adding this in the main dts instead.