CMD_GENERAL_CONTROL takes two 8-bit arguments but CMD_EXT_CONTROL takes two 16-bit arguments. Fix this issue and change CMD_EXT_CONTROL arguments to 16-bit.
Fixes: 5e4d24ccc115 ("gpio: Add Turris Omnia MCU driver") Signed-off-by: Pali Rohár pali@kernel.org --- drivers/gpio/turris_omnia_mcu.c | 56 +++++++++++++++------------------ 1 file changed, 26 insertions(+), 30 deletions(-)
diff --git a/drivers/gpio/turris_omnia_mcu.c b/drivers/gpio/turris_omnia_mcu.c index 3e5d74e62cdb..986ccde6bc70 100644 --- a/drivers/gpio/turris_omnia_mcu.c +++ b/drivers/gpio/turris_omnia_mcu.c @@ -137,48 +137,44 @@ static int turris_omnia_mcu_get_value(struct udevice *dev, uint offset) static int turris_omnia_mcu_set_value(struct udevice *dev, uint offset, int value) { struct turris_omnia_mcu_info *info = dev_get_plat(dev); - u8 val[2]; - int ret; - u8 reg; + u8 val16[2]; + u8 val32[4];
switch (offset) { /* bank 0 */ - case ilog2(STS_USB30_PWRON): - reg = CMD_GENERAL_CONTROL; - val[1] = CTL_USB30_PWRON; - break; - case ilog2(STS_USB31_PWRON): - reg = CMD_GENERAL_CONTROL; - val[1] = CTL_USB31_PWRON; - break; - case ilog2(STS_ENABLE_4V5): - reg = CMD_GENERAL_CONTROL; - val[1] = CTL_ENABLE_4V5; - break; - case ilog2(STS_BUTTON_MODE): - reg = CMD_GENERAL_CONTROL; - val[1] = CTL_BUTTON_MODE; - break; + case 0 ... 15: + switch (offset) { + case ilog2(STS_USB30_PWRON): + val16[1] = CTL_USB30_PWRON; + break; + case ilog2(STS_USB31_PWRON): + val16[1] = CTL_USB31_PWRON; + break; + case ilog2(STS_ENABLE_4V5): + val16[1] = CTL_ENABLE_4V5; + break; + case ilog2(STS_BUTTON_MODE): + val16[1] = CTL_BUTTON_MODE; + break; + default: + return -EINVAL; + } + val16[0] = value ? val16[1] : 0; + return dm_i2c_write(dev, CMD_GENERAL_CONTROL, val16, sizeof(val16));
/* bank 2 - supported only when FEAT_EXT_CMDS is set */ case (16 + 32 + 0) ... (16 + 32 + 15): if (!(info->features & FEAT_EXT_CMDS)) return -EINVAL; - reg = CMD_EXT_CONTROL; - val[1] = BIT(offset - 16 - 32); - break; + val32[3] = BIT(offset - 16 - 32) >> 8; + val32[2] = BIT(offset - 16 - 32) & 0xff; + val32[1] = value ? val32[3] : 0; + val32[0] = value ? val32[2] : 0; + return dm_i2c_write(dev, CMD_EXT_CONTROL, val32, sizeof(val32));
default: return -EINVAL; } - - val[0] = value ? val[1] : 0; - - ret = dm_i2c_write(dev, reg, val, 2); - if (ret) - return ret; - - return 0; }
static int turris_omnia_mcu_direction_input(struct udevice *dev, uint offset)