Timer value is a 16 bits calculated from the wanted timeout and the system clock. On powerpc/8xx, a timeout of 2s gives a value which is over U16_MAX so U16_MAX shall be used. But the calculation is casted to u16 so at the end the result is 63770 instead of 128906.
So the timer gets loaded with 63770 instead of 65535. It is not a big difference in that case, but lets make the code correct and cast to u32 instead of u16.
Fixes: 26e8ebcd7cb7 ("watchdog: mpc8xxx: Make it generic") Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/watchdog/mpc8xxx_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index f28636ca90..67e687a364 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -44,7 +44,7 @@ static int mpc8xxx_wdt_start(struct udevice *dev, u64 timeout, ulong flags) struct mpc8xxx_wdt_priv *priv = dev_get_priv(dev); const char *mode = env_get("watchdog_mode"); ulong prescaler = dev_get_driver_data(dev); - u16 swtc = min_t(u16, timeout * get_board_sys_clk() / 1000 / prescaler, U16_MAX); + u16 swtc = min_t(u32, timeout * get_board_sys_clk() / 1000 / prescaler, U16_MAX); u32 val;
mpc8xxx_wdt_reset(dev);