Add a new entry argument to the fit entry which allows selection of the default configuration to use. This is the 'default' property in the 'configurations' node.
Update the Makefile to pass in the value of DEVICE_TREE or CONFIG_DEFAULT_DEVICE_TREE to provide this information.
Signed-off-by: Simon Glass sjg@chromium.org Suggested-by: Michal Simek michal.simek@xilinx.com ---
Changes in v2: - Add new patch to allow selecting default FIT configuration
Makefile | 2 ++ tools/binman/README.entries | 4 ++++ tools/binman/etype/fit.py | 22 ++++++++++++++++++ tools/binman/ftest.py | 37 ++++++++++++++++++++++++++++++- tools/binman/test/166_fit_fdt.dts | 2 +- 5 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile index 65024c74089..fcc559ce7fa 100644 --- a/Makefile +++ b/Makefile @@ -1321,6 +1321,7 @@ u-boot.ldr: u-boot # binman # --------------------------------------------------------------------------- # Use 'make BINMAN_DEBUG=1' to enable debugging +default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE)) quiet_cmd_binman = BINMAN $@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ --toolpath $(objtree)/tools \ @@ -1329,6 +1330,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \ -a atf-bl31-path=${BL31} \ + -a default-dt=$(default_dt) \ $(BINMAN_$(@F))
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex diff --git a/tools/binman/README.entries b/tools/binman/README.entries index d2628dffd5d..c1d436563e8 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -402,6 +402,10 @@ Available substitutions for '@' nodes are: Note that if no devicetree files are provided (with '-a of-list' as above) then no nodes will be generated.
+The 'default' property, if present, will be automatically set to the name +if of configuration whose devicetree matches the 'default-dt' entry +argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'. +
Properties (in the 'fit' node itself): fit,external-offset: Indicates that the contents of the FIT are external diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py index bfea02a152b..7ebab5c6c81 100644 --- a/tools/binman/etype/fit.py +++ b/tools/binman/etype/fit.py @@ -90,6 +90,10 @@ class Entry_fit(Entry): Note that if no devicetree files are provided (with '-a of-list' as above) then no nodes will be generated.
+ The 'default' property, if present, will be automatically set to the name + if of configuration whose devicetree matches the 'default-dt' entry + argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'. +
Properties (in the 'fit' node itself): fit,external-offset: Indicates that the contents of the FIT are external @@ -121,6 +125,8 @@ class Entry_fit(Entry): [EntryArg(self._fit_list_prop.value, str)]) if fdts is not None: self._fdts = fdts.split() + self._fit_default_dt = self.GetEntryArgsOrProps([EntryArg('default-dt', + str)])[0]
def ReadNode(self): self._ReadSubnodes() @@ -142,6 +148,22 @@ class Entry_fit(Entry): """ for pname, prop in node.props.items(): if not pname.startswith('fit,'): + if pname == 'default': + val = prop.value + # Handle the 'default' property + if val.startswith('@'): + if not self._fdts: + continue + if not self._fit_default_dt: + self.Raise("Generated 'default' node requires default-dt entry argument") + if self._fit_default_dt not in self._fdts: + self.Raise("default-dt entry argument '%s' not found in fdt list: %s" % + (self._fit_default_dt, + ', '.join(self._fdts))) + seq = self._fdts.index(self._fit_default_dt) + val = val[1:].replace('DEFAULT-SEQ', str(seq + 1)) + fsw.property_string(pname, val) + continue fsw.property(pname, prop.bytes)
rel_path = node.path[len(base_node.path):] diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 1dbda57dc72..84145ec5a93 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -3556,7 +3556,7 @@ class TestFunctional(unittest.TestCase): """ cnode = dtb.GetNode('/configurations') self.assertIn('default', cnode.props) - self.assertEqual('config-1', cnode.props['default'].value) + self.assertEqual('config-2', cnode.props['default'].value)
name = 'config-%d' % seq fnode = dtb.GetNode('/configurations/%s' % name) @@ -3569,6 +3569,7 @@ class TestFunctional(unittest.TestCase):
entry_args = { 'of-list': 'test-fdt1 test-fdt2', + 'default-dt': 'test-fdt2', } data = self._DoReadFileDtb( '166_fit_fdt.dts', @@ -3611,5 +3612,39 @@ class TestFunctional(unittest.TestCase): self.assertIn("Generator node requires 'fit,fdt-list' property", str(e.exception))
+ def testFitFdtEmptyList(self): + """Test handling of an empty 'of-list' entry arg""" + entry_args = { + 'of-list': '', + } + data = self._DoReadFileDtb('166_fit_fdt.dts', entry_args=entry_args)[0] + + def testFitFdtMissing(self): + """Test handling of a missing 'default-dt' entry arg""" + entry_args = { + 'of-list': 'test-fdt1 test-fdt2', + } + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb( + '166_fit_fdt.dts', + entry_args=entry_args, + extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0] + self.assertIn("Generated 'default' node requires default-dt entry argument", + str(e.exception)) + + def testFitFdtNotInList(self): + """Test handling of a default-dt that is not in the of-list""" + entry_args = { + 'of-list': 'test-fdt1 test-fdt2', + 'default-dt': 'test-fdt3', + } + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb( + '166_fit_fdt.dts', + entry_args=entry_args, + extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0] + self.assertIn("default-dt entry argument 'test-fdt3' not found in fdt list: test-fdt1, test-fdt2", + str(e.exception)) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/test/166_fit_fdt.dts b/tools/binman/test/166_fit_fdt.dts index 89142e91017..99d710c57e9 100644 --- a/tools/binman/test/166_fit_fdt.dts +++ b/tools/binman/test/166_fit_fdt.dts @@ -40,7 +40,7 @@ };
configurations { - default = "config-1"; + default = "@config-DEFAULT-SEQ"; @config-SEQ { description = "conf-NAME.dtb"; firmware = "uboot";