Some SD Card controller and power circuitry has increased capacitance, which keeps the internal logic remains powered after regulator is switch off. This is generally the case when card is switched to SD104 mode, where a power cycle should be performed. In case if the card internal logic remains powered, it causes a subsequent failure of mode transition, effectively leading to failed enumeration.
Introduce a delay of 20 msec in order to provide a possibility for internal card circuitry to drain voltages and perform a power cycle correctly.
Similar fix is done in commit c49d0ac38a76 ("ARM: dts: rmobile: Increase off-on delay on the SD Vcc regulator") targeted Renesas SOCs.
Signed-off-by: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 4 ++++ arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4 ++++ arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 ++++ arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 ++++ arch/arm/dts/imx8mq-evk.dts | 1 + arch/arm/dts/imx8mq-phanbell.dts | 1 + 6 files changed, 18 insertions(+)
diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi index fc1aebb2fe..6d80a529ae 100644 --- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi @@ -37,6 +37,10 @@ /delete-property/ assigned-clock-rates; };
+®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + &fec1 { phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi index b5c12105a9..9f77d3c6ff 100644 --- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi @@ -46,6 +46,10 @@ u-boot,dm-spl; };
+®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + &pinctrl_reg_usdhc2_vmmc { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi index 4419679d4c..98b0b9891b 100644 --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi @@ -47,6 +47,10 @@ u-boot,dm-spl; };
+®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + &pinctrl_uart2 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi index 24a93ac2d6..2452e9175c 100644 --- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi @@ -48,6 +48,10 @@ u-boot,dm-spl; };
+®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; +}; + ®_usdhc2_vmmc { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mq-evk.dts b/arch/arm/dts/imx8mq-evk.dts index 55294ba9c8..9663683f69 100644 --- a/arch/arm/dts/imx8mq-evk.dts +++ b/arch/arm/dts/imx8mq-evk.dts @@ -39,6 +39,7 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; + u-boot,off-on-delay-us = <20000>; };
buck2_reg: regulator-buck2 { diff --git a/arch/arm/dts/imx8mq-phanbell.dts b/arch/arm/dts/imx8mq-phanbell.dts index 4892ad5ee1..bc6b2638ee 100644 --- a/arch/arm/dts/imx8mq-phanbell.dts +++ b/arch/arm/dts/imx8mq-phanbell.dts @@ -34,6 +34,7 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; + u-boot,off-on-delay-us = <20000>; }; };