From: Ye Li ye.li@nxp.com
When doing DDR scrub, the DDR may enter into self refresh if the selfref_en is enabled before DDR scrub. This will cause scrub can't complete that SBRSTAT.scrub_done won't be set.
Since the selfref_en can be programmed during the course of normal operation, move it after DDR scrub
Signed-off-by: Ye Li ye.li@nxp.com Acked-by: Peng Fan peng.fan@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/ddr/imx/imx8m/ddr_init.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/ddr/imx/imx8m/ddr_init.c b/drivers/ddr/imx/imx8m/ddr_init.c index 65739dbaa7..57331649ac 100644 --- a/drivers/ddr/imx/imx8m/ddr_init.c +++ b/drivers/ddr/imx/imx8m/ddr_init.c @@ -236,8 +236,6 @@ int ddr_init(struct dram_timing_info *dram_timing)
/* Step26: Set back register in Step4 to the original values if desired */ reg32_write(DDRC_RFSHCTL3(0), 0x0000000); - /* enable selfref_en by default */ - setbits_le32(DDRC_PWRCTL(0), 0x1);
/* enable port 0 */ reg32_write(DDRC_PCTRL_0(0), 0x00000001); @@ -245,6 +243,9 @@ int ddr_init(struct dram_timing_info *dram_timing)
board_dram_ecc_scrub();
+ /* enable selfref_en by default */ + setbits_le32(DDRC_PWRCTL(0), 0x1); + /* save the dram timing config into memory */ dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE);