With latest support for Marvell Dove SoC, add the SolidRun CuBox as the very first board with that SoC.
Signed-off-by: Sebastian Hesselbarth sebastian.hesselbarth@gmail.com --- Cc: u-boot@lists.denx.de Cc: Sebastian Hesselbarth sebastian.hesselbarth@gmail.com Cc: Rabeeh Khoury rabeeh@solid-run.com Cc: Albert Aribaud albert.u.boot@aribaud.net Cc: Prafulla Wadaskar prafulla@marvell.com Cc: Andy Fleming afleming@gmail.com Cc: Joe Hershberger joe.hershberger@gmail.com Cc: Daniel Stodden daniel.stodden@gmail.com Cc: Dieter Kiermaier dk-arm-linux@gmx.de --- board/solidrun/cubox/Makefile | 45 ++++++++++ board/solidrun/cubox/cubox.c | 141 ++++++++++++++++++++++++++++++ board/solidrun/cubox/kwbimage.cfg | 76 ++++++++++++++++ boards.cfg | 1 + include/configs/cubox.h | 175 +++++++++++++++++++++++++++++++++++++ 5 files changed, 438 insertions(+) create mode 100644 board/solidrun/cubox/Makefile create mode 100644 board/solidrun/cubox/cubox.c create mode 100644 board/solidrun/cubox/kwbimage.cfg create mode 100644 include/configs/cubox.h
diff --git a/board/solidrun/cubox/Makefile b/board/solidrun/cubox/Makefile new file mode 100644 index 0000000..c771d72 --- /dev/null +++ b/board/solidrun/cubox/Makefile @@ -0,0 +1,45 @@ +# +# SolidRun CuBox Makefile +# +# Sebastian Hesselbarth sebastian.hesselbarth@gmail.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := cubox.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/solidrun/cubox/cubox.c b/board/solidrun/cubox/cubox.c new file mode 100644 index 0000000..70c016f --- /dev/null +++ b/board/solidrun/cubox/cubox.c @@ -0,0 +1,141 @@ +/* + * SolidRun CuBox board support + * + * Sebastian Hesselbarth sebastian.hesselbarth@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dove.h> +#include <asm/arch/mpp.h> +#include <orion_gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +static u16 mpp_config[] = { + MPP0_GPIO, + MPP1_GPIO, /* USB power enable */ + MPP2_GPIO, /* USB over-current indication */ + MPP3_GPIO, /* micro button beneath eSATA port */ + MPP4_GPIO, + MPP5_GPIO, + MPP6_GPIO, + MPP7_GPIO, + + MPP8_GPIO, + MPP9_GPIO, + MPP10_GPIO, + MPP11_GPIO, + MPP12_GPIO, /* SDIO0 card detect */ + MPP13_AUDIO1_EXTCLK, /* Si5351a audio clock output */ + MPP14_GPIO, + MPP15_GPIO, + + MPP16_GPIO, + MPP17_GPIO, + MPP18_GPIO, /* Red front LED */ + MPP19_UART3_RXD, /* IR sensor */ + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + + MPP_CAMERA_GPIO, + MPP_SDIO0_SDIO, /* SDIO0 */ + MPP_SDIO1_GPIO, + MPP_AUDIO1_I2S_SPDIFO, /* SPDIF and HDMI audio */ + MPP_SPI_SPI, /* SPI */ + MPP_UART1_GPIO, + MPP_NAND_GPO, + + MPP_AUDIO0_I2S, + MPP_TWSI_OPTION1, /* TWSI on dedicated pins */ + 0 }; + +int board_early_init_f(void) +{ + struct dove_gpio_init gpp = { + .val0 = 0x00010186, + .oe0_n = 0xffffffff, + .val1 = 0x018000c0, + .oe1_n = 0xffffffff, + .val2 = 0x00000000, + .oe2_n = 0xffffffff, + }; + + dove_init_gpio(&gpp); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = dove_dram_start(0) + 0x100; + + /* configure mpp */ + dove_mpp_conf(mpp_config); + + /* usb power enable */ + orion_gpio_direction_output(MPP1, GPIO_HIGH); + + /* blink led */ + orion_gpio_direction_output(MPP18, GPIO_HIGH); + orion_gpio_set_blink(MPP18, 1); + + return 0; +} + +#ifdef CONFIG_MMC +int board_mmc_init(bd_t *bis) +{ + dove_sdhci_init(0); + return 0; +} +#endif + +#ifdef CONFIG_RESET_PHY_R +void dove_eth_phy_init(char *name) +{ + u16 devadr; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..%s could not read PHY dev address\n", + __func__); + return; + } + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("%s PHY initialized\n", name); +} + +void reset_phy(void) +{ + dove_eth_phy_init("egiga0"); +} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/solidrun/cubox/kwbimage.cfg b/board/solidrun/cubox/kwbimage.cfg new file mode 100644 index 0000000..c3f1ad9 --- /dev/null +++ b/board/solidrun/cubox/kwbimage.cfg @@ -0,0 +1,76 @@ +# +# Marvell BootROM config for SolidRun CuBox +# +# Sebastian Hesselbarth sebastian.hesselbarth@gmail.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +DATA 0xd0020104 0x00000000 # CPU Control and Status register + +# SDRAM initalization +DATA 0xd0800020 0x00022430 # SDRAM Configuration register 0 +DATA 0xd0800030 0x00022430 # SDRAM Configuration register 1 +DATA 0xd0800050 0x911500c3 # SDRAM Timing register 1 +DATA 0xd0800060 0x646602c4 # SDRAM Timing register 2 +DATA 0xd0800190 0xc2003053 # SDRAM Timing register 3 +DATA 0xd08001c0 0x34f4a187 # SDRAM Timing register 4 +DATA 0xd0800650 0x000f0121 # SDRAM Timing register 5 +DATA 0xd0800660 0x04040200 # SDRAM Timing register 6 +DATA 0xd0800080 0x00000000 # SDRAM Control register 1 +DATA 0xd0800090 0x00080000 # SDRAM Control register 2 +DATA 0xd08000f0 0xc0000000 # SDRAM Control register 3 +DATA 0xd08001a0 0x20c0c009 # SDRAM Control register 4 +DATA 0xd0800280 0x010e0202 # SDRAM Control register 5 +DATA 0xd0800760 0x00000000 # SDRAM Control register 6 +DATA 0xd0800770 0x0000000a # SDRAM Control register 7 +DATA 0xd0800140 0x20004044 # SDRAM PHY control register 3 +DATA 0xd08001d0 0x133c2339 # SDRAM PHY control register 7 +DATA 0xd08001e0 0x07700330 # SDRAM PHY control register 8 +DATA 0xd08001f0 0x00000033 # SDRAM PHY control register 9 +DATA 0xd0800200 0x0011311c # SDRAM PHY control register 10 +DATA 0xd0800210 0x00300000 # SDRAM PHY control register 11 +DATA 0xd0800240 0x80000000 # SDRAM PHY control register 14 +DATA 0xd0800510 0x010e0101 # SDRAM MCB control register 1 +DATA 0xd0800230 0x2028006a # SDRAM PHY control register 13 +DATA 0xd0800e10 0x00280062 # SDRAM PHY DLL control registers 2 +DATA 0xd0800e20 0x00280062 # SDRAM PHY DLL control registers 3 +DATA 0xd0800e30 0x00280062 # SDRAM PHY DLL control registers 4 + +# SDRAM memory map (2x512MB) +DATA 0xd0800100 0x000d0001 # SDRAM Memory Address Map register 1 +DATA 0xd0800110 0x200d0001 # SDRAM Memory Address Map register 1 + +DATA 0xd0020104 0x00000000 # CPU Control and Status register +DATA 0xd0020104 0x00000000 # CPU Control and Status register +DATA 0xd0020104 0x00000000 # CPU Control and Status register +DATA 0xd0020104 0x00000000 # CPU Control and Status register +DATA 0xd0020104 0x00000000 # CPU Control and Status register + +# End of Header extension +DATA 0x0 0x0 diff --git a/boards.cfg b/boards.cfg index ca9b12b..1bd734b 100644 --- a/boards.cfg +++ b/boards.cfg @@ -289,6 +289,7 @@ whistler arm armv7:arm720t whistler nvidia colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 +cubox arm armv7 cubox solidrun dove kzm9g arm armv7 kzm9g kmc rmobile armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq diff --git a/include/configs/cubox.h b/include/configs/cubox.h new file mode 100644 index 0000000..223b1d7 --- /dev/null +++ b/include/configs/cubox.h @@ -0,0 +1,175 @@ +/* + * SolidRun CuBox config + * + * Sebastian Hesselbarth sebastian.hesselbarth@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_CUBOX_H +#define _CONFIG_CUBOX_H +#include <asm/sizes.h> + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\SolidRun CuBox" + +/* + * High Level Configuration Options + */ +#define CONFIG_MACH_SOLIDRUN_CUBOX /* Machine type */ +#define CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_ORION_GPIO /* Orion GPIO driver */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* + * Enable u-boot API for standalone programs. + */ +#define CONFIG_API + +/* + * Enable devicetree support + */ +#define CONFIG_OF_LIBFDT + +/* + * Commands configuration + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_USB +#define CONFIG_CMD_MMC + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFT_PARTITION + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * redefine mv-common.h macros for armv7/cubox + */ +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "CuBox> " /* Command Prompt */ + +/* There is no arch_misc_init on armv7 */ +#undef CONFIG_ARCH_MISC_INIT + +#undef CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* 4MiB for malloc() */ + +/* + * Environment variables configurations + */ +#if defined(CONFIG_CMD_SF) +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x1000 /* 4k */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif + +/* + * Default CuBox bootscript environment + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootscript=boot.scr\0" \ + "loadaddr=0x02000000\0" \ + "mmc_started=0\0" \ + "ide_started=0\0" \ + "usb_started=0\0" \ + "mtdparts=mtdparts=spi0.0:768k(u-boot)ro,128k(uboot_env),128k(fdt),-(empty)\0" \ + "ethaddr=00:50:43:15:17:17\0" + +#define CONFIG_BOOTCOMMAND \ + "for devn in usb mmc ide ; do " \ + " for part in 0 1; do " \ + " for dir in / /boot/;do " \ + " for fs in ext2 fat; do " \ + " echo ===> Executing ${fs}load ${devn} 0:${part} ${loadaddr} ${dir}${bootscript};" \ + " if itest.s $devn -eq mmc; then" \ + " if itest.s $mmc_started -ne 1; then" \ + " mmcinfo; setenv mmc_started '1';fi;fi;" \ + " if itest.s $devn -eq usb; then" \ + " if itest.s $usb_started -ne 1; then" \ + " usb start; setenv usb_started '1';fi;fi;" \ + " if itest.s $devn -eq ide; then" \ + " if itest.s $ide_started -ne 1; then" \ + " ide reset; setenv ide_started '1';fi;fi;" \ + " if ${fs}load ${devn} 0:${part} ${loadaddr} ${dir}${bootscript}; then" \ + " source ${loadaddr}; fi;" \ + " if itest.s $devn -eq usb; then" \ + " echo ===> Executing ${fs}load ${devn} 1:${part} ${loadaddr} ${dir}${bootscript};" \ + " if ${fs}load ${devn} 1:${part} ${loadaddr} ${dir}${bootscript}; then" \ + " source ${loadaddr}; fi;" \ + " fi;" \ + " done;" \ + " done;" \ + " done;" \ + "done;" \ + "tftp ${loadaddr} ${bootscript};" \ + "source ${loadaddr};" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1} /* enable port 0 */ +#define CONFIG_PHY_BASE_ADR 1 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MARVELL +#endif /* CONFIG_CMD_NET */ + +#ifdef CONFIG_CMD_IDE +#undef CONFIG_IDE_LED +#undef CONFIG_SYS_IDE_MAXBUS +#define CONFIG_SYS_IDE_MAXBUS 1 +#undef CONFIG_SYS_IDE_MAXDEVICE +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif + +/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO + +#endif /* _CONFIG_CUBOX_H */