While having DM driver is a good thing, currently this defconfig is completely broken in a way that SD cards can not even be detected.
Remove some of the DM drivers to avoid the regression for now and allow booting a kernel stored in the SD card again.
Re-adding the DM drivers can be revisited later.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- Applied on top of:
https://patchwork.ozlabs.org/patch/820477/
and
https://patchwork.ozlabs.org/patch/820298/
configs/mx6slevk_defconfig | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index c876c6b..51735ec 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y CONFIG_TARGET_MX6SLEVK=y # CONFIG_CMD_BMODE is not set CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk" -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_I2C" CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y @@ -29,21 +29,12 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_DM=y # CONFIG_BLK is not set -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_DM_MMC=y CONFIG_CMD_PART=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y -CONFIG_DM_PMIC=y -CONFIG_DM_PMIC_PFUZE100=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_PFUZE100=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_USB_STORAGE=y