Re: [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG

That did it! Thanks.

Bill

On 7/30/2012 3:59 PM, Fabio Estevam wrote:

On Mon, Jul 30, 2012 at 3:53 PM, Billbsousan@techsi.com wrote:

...

Progress! I switched all the references from ttyAMA0... to ttyAM0. Also changed netargs too. Now it starts to boot linux but hangs right after the line of: mxs_cpu_init: cpufreq init finished.

Please remove cpufreq from your kernel config.

You can use this patch: https://github.com/Freescale/meta-fsl-arm/blob/denzil/recipes-kernel/linux/l...

Regards,

Fabio Estevam