Hi Fabio,
On Tue, Jul 16, 2019 at 3:44 PM Igor Opaniuk igor.opaniuk@gmail.com wrote:
Hi Fabio,
On Mon, Jul 15, 2019 at 10:10 PM Fabio Estevam festevam@gmail.com wrote:
Hi Igor,
On Mon, Jul 15, 2019 at 11:20 AM Igor Opaniuk igor.opaniuk@gmail.com wrote:
From: Igor Opaniuk igor.opaniuk@toradex.com
For Colibri iMX6ULL we have to set pinmux configuration ASAP (ideally before relocation) to get serial console working. Without this we miss almost the half of output (U-boot version, CPU defails, Reset cause, DRAM details etc.).
To achieve this we need to force pinctrl-mx6 to get probed before relocation. Setting pinmux configuration for UART before was done in board_early_init_f().
Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm") Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com
drivers/pinctrl/nxp/pinctrl-imx6.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c index 0c1e7a9c05..aafa3057ad 100644 --- a/drivers/pinctrl/nxp/pinctrl-imx6.c +++ b/drivers/pinctrl/nxp/pinctrl-imx6.c @@ -49,7 +49,5 @@ U_BOOT_DRIVER(imx6_pinctrl) = { .remove = imx_pinctrl_remove, .priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv), .ops = &imx_pinctrl_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) .flags = DM_FLAG_PRE_RELOC, -#endif
It seems that this is not i.MX6 specific (maybe not even i.MX specific. I noticed this issue on i.MX7 too).
Right. Currently there are no any output issues on Colibri iMX7 because board_early_init_f() does apply initial pinmux configuration for uart [1].
Could this be handled in the drivers/pinctrl core instead?
Just wanted to see if we can get a more generic solution for this issue.
Thanks
AFAIK, DM_FLAG_PRE_RELOC flag can be set for a driver, not for the whole uclass (but I might be mistaken). Also taking into account memory limitations (small malloc pool etc) before U-boot is relocated, I would force driver to be bounded only in the cases when it's really vital (like this particular case with serial console issue).
I'm currently in the middle of preparing v2, just wanted to know if you do agree with this point and in general have any additional suggestions regarding this?
Thanks!
[1] board/toradex/colibri_imx7/colibri_imx7.c
-- Best regards - Freundliche Grüsse - Meilleures salutations
Igor Opaniuk
mailto: igor.opaniuk@gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk
Thanks