On 6/18/19 4:57 PM, Patrick Delaunay wrote:
Manage g-tx-fifo-size as a array as specify in the binding.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com
Reviewed-by: Marek Vasut marex@denx.de
I'm missing 2/3 , although I think it might be better if you take this whole series through u-boot-stm .
Changes in v2:
- move dt update in a separate patch
- remove unecessary temporary variable
drivers/usb/gadget/dwc2_udc_otg.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c index 494ab53..023439c 100644 --- a/drivers/usb/gadget/dwc2_udc_otg.c +++ b/drivers/usb/gadget/dwc2_udc_otg.c @@ -1039,6 +1039,7 @@ static int dwc2_udc_otg_ofdata_to_platdata(struct udevice *dev) int node = dev_of_offset(dev); ulong drvdata; void (*set_params)(struct dwc2_plat_otg_data *data);
int ret;
if (usb_get_dr_mode(node) != USB_DR_MODE_PERIPHERAL) { dev_dbg(dev, "Invalid mode\n");
@@ -1050,7 +1051,18 @@ static int dwc2_udc_otg_ofdata_to_platdata(struct udevice *dev) platdata->rx_fifo_sz = dev_read_u32_default(dev, "g-rx-fifo-size", 0); platdata->np_tx_fifo_sz = dev_read_u32_default(dev, "g-np-tx-fifo-size", 0);
- platdata->tx_fifo_sz = dev_read_u32_default(dev, "g-tx-fifo-size", 0);
platdata->tx_fifo_sz_nb =
dev_read_size(dev, "g-tx-fifo-size") / sizeof(u32);if (platdata->tx_fifo_sz_nb > DWC2_MAX_HW_ENDPOINTS)
platdata->tx_fifo_sz_nb = DWC2_MAX_HW_ENDPOINTS;if (platdata->tx_fifo_sz_nb) {
ret = dev_read_u32_array(dev, "g-tx-fifo-size",platdata->tx_fifo_sz_array,platdata->tx_fifo_sz_nb);if (ret)return ret;}
platdata->force_b_session_valid = dev_read_bool(dev, "u-boot,force-b-session-valid");