In message F509E6111989D311B63700805FA761DA09F28F84@DBDE01 you wrote:
U-Boot 1.0.0 (Feb 19 2004 - 11:23:36)
U-Boot code: 11000000 -> 11015790 BSS: -> 11019494
This seems no really useful to me. Normally, U-Boot will be place at the END of the available RAM, while you seem tp place it in the middle?
This is what gets printed when I boot my board. Also you can find it out by looking at the TEXT_ADDR defined in boards/xxxxx/config.mk file.
I guess you mean TEXT_BASE - but this is habdled differently on different architectures.
On PowerPC this just defines where U-Boot gets installed in flash. On ARM (which is still broken in this respect) it means the address where it gets copied to in RAM. I hope this gets fixed one day.
Best regards,
Wolfgang Denk