dear:
i am using u-boot 2011.03-rc1 compiled by CS arm-none-eabi-gcc 4.5.1
board at91sam9263ek_norflash_boot_config i using gdb 6.8.1 debug it
when u-boot compiled i found an error
/dzg/crosstool/4.5.1/bin/.arm-none-eabi-ld: warning: creating a DT_TEXTREL in object.
/dzg/x86/insight-6.8-1/gdb/insight -se u-boot
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 37 >= 0 for section `'
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 32 >= 0 for section `'
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 53 >= 0 for section `'
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 1 >= 0 for section `'
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 20 >= 0 for section `'
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 82 >= 0 for section `'
BFD: /dzg/arm/u-boot/u-boot-2011.03-rc1/u-boot: invalid string offset 67 >= 0 for section `'
when i set breakpoint such as
b board_init_f it seems to show wrong line number at line 132
i also found this version of u-boot change board_init_f to run in flash
why dose it? in version 2010.09 it run after relocated in ram
i found the linker link init_fnc_t *init_sequence[]
functions with address like 0x23fxxxxx
what does the linker do with -pie option does it link the functions run in flash with addr like 0xaxxxx?
do you test eldk 4.2 compiled with this board and run in norflash?
thanks
best regards