Hello,
this is the second version of the phyCORE-i.MX8MP updates. This includes also an update of imx8mp.dtsi from kernel and the introduction of a common imx8mp-u-boot.dtsi.
Changes in v2: [5/9] - removed hardcoded serverip in environment - removed not needed fec eth defines in board config include
Teresa
Teresa Remmet (9): arm: dts: imx8mp: Resync imx8mp device tree include arm: dts: imx8mp: Add common u-boot dtsi arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel board: phytec: phycore_imx8mp: Change debug UART board: phytec: phycore_imx8mp: Add fec support board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V board: phytec: phycore-imx8mp: Enable DVS1 control arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry board: phytec: imx8mp-phycore: Switch to binman
arch/arm/dts/imx8mp-evk-u-boot.dtsi | 39 +---- .../imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 152 +++++++++++++----- arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 58 ++++++- arch/arm/dts/imx8mp-phycore-som.dtsi | 2 +- arch/arm/dts/imx8mp-u-boot.dtsi | 42 +++++ arch/arm/dts/imx8mp.dtsi | 146 ++++++++++++++++- arch/arm/mach-imx/imx8m/Kconfig | 1 + .../phytec/phycore_imx8mp/imximage-8mp-sd.cfg | 10 ++ board/phytec/phycore_imx8mp/phycore-imx8mp.c | 14 ++ board/phytec/phycore_imx8mp/spl.c | 23 ++- configs/phycore-imx8mp_defconfig | 12 +- include/configs/phycore_imx8mp.h | 21 ++- 12 files changed, 422 insertions(+), 98 deletions(-) create mode 100644 arch/arm/dts/imx8mp-u-boot.dtsi create mode 100644 board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg