Did you try "setenv bootdelay 0" in uboot?
On Mon, Oct 12, 2009 at 7:07 AM, Fortini Matteo matteo.fortini@mta.it wrote:
Hi all, we've been working on a PPC512x board booting with u-boot + linux 2.6.24.6, and one major issue for our application is boot time.
Right now, we went down to less than 6s boot time (i.e. time from power off to launch of the user app), even with some drivers installed, i.e.:
* CAN bus * GPU on PCI bus * USB host * UBI
with r/o squashfs root and r/w ubifs configuration filesystem mounted from a NOR flash memory.
This time could be enough for the high-level application (we're showing a splash screen in about 2-3s so it's ok if the main app takes a little longer to come up), but the whole system is connected to others via CAN and we can't afford the "black out" period between u-boot and linux.
Some other operating systems (e.g. QNX) have this "seamless booting" function, in which drivers are started in stages, so that a (minimal) functionality can be given in milliseconds, and more functionalities come up as time goes by.
Is there a way to support something similar with the u-boot -> linux solution?
Thank you, Matteo _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev