The introduction of the DM pinctrl driver saw many clocks, referenced in the respective pinctrl DT nodes, being enabled by the DM clock driver.
We didn't model all them correctly, so there are now some warnings on the console when booting: ========= sunxi_set_gate: (CLK#58) unhandled =========
This series fixes them. The first patch just describes some missing gate clocks, mostly for the pin controller directly. The second patch introduces a GATE_DUMMY macro, that allows to just ignore some other clocks, and to suppress the warnings.
Please have a look and test!
Cheers, Andre
Andre Przywara (2): clk: sunxi: add PIO bus gate clocks clk: sunxi: add and use dummy gate clocks
drivers/clk/sunxi/clk_a10.c | 2 ++ drivers/clk/sunxi/clk_a10s.c | 2 ++ drivers/clk/sunxi/clk_a23.c | 2 ++ drivers/clk/sunxi/clk_a31.c | 2 ++ drivers/clk/sunxi/clk_a64.c | 4 ++++ drivers/clk/sunxi/clk_a80.c | 2 ++ drivers/clk/sunxi/clk_a83t.c | 2 ++ drivers/clk/sunxi/clk_h3.c | 4 ++++ drivers/clk/sunxi/clk_h6.c | 4 ++++ drivers/clk/sunxi/clk_h616.c | 4 ++++ drivers/clk/sunxi/clk_h6_r.c | 2 ++ drivers/clk/sunxi/clk_r40.c | 2 ++ drivers/clk/sunxi/clk_sunxi.c | 3 +++ drivers/clk/sunxi/clk_v3s.c | 2 ++ include/clk/sunxi.h | 5 +++++ 15 files changed, 42 insertions(+)