This adds CI tests for SiFive Unleashed board.
QEMU supports booting exact the same images as used on the real hardware out of the box, that U-Boot SPL loads U-Boot proper from either an SD card or the SPI NOR flash, hence we can easily set up CI to cover these 2 boot flows of SiFive Unleashed board.
With this, now we can have regression testing of mmc-spi-slot and sifive spi drivers, as well as mmc and spi-nor subsystems.
Signed-off-by: Bin Meng bmeng.cn@gmail.com ---
.azure-pipelines.yml | 20 +++++++++++++++++++- .gitlab-ci.yml | 26 +++++++++++++++++++++++++- 2 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index 15507a7357..2e9c1fb4fd 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -254,6 +254,12 @@ jobs: r2dplus_tulip: TEST_PY_BD: "r2dplus" TEST_PY_ID: "--id tulip_qemu" + sifive_unleashed_sdcard: + TEST_PY_BD: "sifive_unleashed" + TEST_PY_ID: "--id sdcard_qemu" + sifive_unleashed_spi-nor: + TEST_PY_BD: "sifive_unleashed" + TEST_PY_ID: "--id spi-nor_qemu" xilinx_zynq_virt: TEST_PY_BD: "xilinx_zynq_virt" TEST_PY_ID: "--id qemu" @@ -289,7 +295,7 @@ jobs: wget -O - https://github.com/riscv/opensbi/releases/download/v0.9/opensbi-0.9-rv-bin.t... | tar -C /tmp -xJ; export OPENSBI=/tmp/opensbi-0.9-rv-bin/share/opensbi/ilp32/generic/firmware/fw_dynamic.bin; fi - if [[ "${TEST_PY_BD}" == "qemu-riscv64_spl" ]]; then + if [[ "${TEST_PY_BD}" == "qemu-riscv64_spl" ]] || [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then wget -O - https://github.com/riscv/opensbi/releases/download/v0.9/opensbi-0.9-rv-bin.t... | tar -C /tmp -xJ; export OPENSBI=/tmp/opensbi-0.9-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; fi @@ -302,6 +308,18 @@ jobs: cp /opt/grub/grubriscv64.efi ${UBOOT_TRAVIS_BUILD_DIR}/grub_riscv64.efi cp /opt/grub/grubaa64.efi ${UBOOT_TRAVIS_BUILD_DIR}/grub_arm64.efi cp /opt/grub/grubarm.efi ${UBOOT_TRAVIS_BUILD_DIR}/grub_arm.efi + # create sdcard / spi-nor images for sifive unleashed using genimage + if [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then + mkdir -p root; + cp ${UBOOT_TRAVIS_BUILD_DIR}/spl/u-boot-spl.bin .; + cp ${UBOOT_TRAVIS_BUILD_DIR}/u-boot.itb .; + rm -rf tmp; + genimage --inputpath . --config board/sifive/unleashed/genimage_sdcard.cfg; + cp images/sdcard.img ${UBOOT_TRAVIS_BUILD_DIR}/; + rm -rf tmp; + genimage --inputpath . --config board/sifive/unleashed/genimage_spi-nor.cfg; + cp images/spi-nor.img ${UBOOT_TRAVIS_BUILD_DIR}/; + fi virtualenv -p /usr/bin/python3 /tmp/venv . /tmp/venv/bin/activate pip install -r test/py/requirements.txt diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index ffdeaae5a8..599de6e506 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -23,7 +23,7 @@ stages: wget -O - https://github.com/riscv/opensbi/releases/download/v0.9/opensbi-0.9-rv-bin.t... | tar -C /tmp -xJ; export OPENSBI=/tmp/opensbi-0.9-rv-bin/share/opensbi/ilp32/generic/firmware/fw_dynamic.bin; fi - - if [[ "${TEST_PY_BD}" == "qemu-riscv64_spl" ]]; then + - if [[ "${TEST_PY_BD}" == "qemu-riscv64_spl" ]] || [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then wget -O - https://github.com/riscv/opensbi/releases/download/v0.9/opensbi-0.9-rv-bin.t... | tar -C /tmp -xJ; export OPENSBI=/tmp/opensbi-0.9-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin; fi @@ -40,6 +40,18 @@ stages: - cp /opt/grub/grubriscv64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_riscv64.efi - cp /opt/grub/grubaa64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi - cp /opt/grub/grubarm.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi + # create sdcard / spi-nor images for sifive unleashed using genimage + - if [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then + mkdir -p root; + cp ${UBOOT_TRAVIS_BUILD_DIR}/spl/u-boot-spl.bin .; + cp ${UBOOT_TRAVIS_BUILD_DIR}/u-boot.itb .; + rm -rf tmp; + genimage --inputpath . --config board/sifive/unleashed/genimage_sdcard.cfg; + cp images/sdcard.img ${UBOOT_TRAVIS_BUILD_DIR}/; + rm -rf tmp; + genimage --inputpath . --config board/sifive/unleashed/genimage_spi-nor.cfg; + cp images/spi-nor.img ${UBOOT_TRAVIS_BUILD_DIR}/; + fi - virtualenv -p /usr/bin/python3 /tmp/venv - . /tmp/venv/bin/activate - pip install -r test/py/requirements.txt @@ -317,6 +329,18 @@ r2dplus_tulip test.py: TEST_PY_ID: "--id tulip_qemu" <<: *buildman_and_testpy_dfn
+sifive_unleashed_sdcard test.py: + variables: + TEST_PY_BD: "sifive_unleashed" + TEST_PY_ID: "--id sdcard_qemu" + <<: *buildman_and_testpy_dfn + +sifive_unleashed_spi-nor test.py: + variables: + TEST_PY_BD: "sifive_unleashed" + TEST_PY_ID: "--id spi-nor_qemu" + <<: *buildman_and_testpy_dfn + xilinx_zynq_virt test.py: variables: TEST_PY_BD: "xilinx_zynq_virt"