Re: [U-Boot-Users] jffs2 fs for linux

Alan Casey wrote:

Hi Hinko,

I had a similar problem. If you make sure that your Flash is programmed similar to the following order then it should work with the setup you describe:

Image1 Addr1 u-boot <-- mounted as /dev/mtdblock0 Image2 Addr2 kernel <-- mounted as /dev/mtdblock1 Image3 Addr3 jffs2 <-- mounted as /dev/mtdblock2

Hmm, this is just like my setup in flash. 0x00000000 - 0x000c0000 uboot+env 0x000c0000 - 0x002c0000 kernel 0x002c0000 - 0x02000000 rootfs(jffs2)

But as you can see from my previous post, kernel does not mount the rootfs as expected.

Are there any special/other bits I have to setup?

The same layout works on another pxa platform I have, but it is not running u-boot...

regards, hk