It is likely that the DM conversion of EHCI iMX5 driver was a derivative of EHCI VF, however the conversion is incomplete and is missing the bind workaround, which updates dev->seq number. Without this, all controllers have dev->seq number 0 . Add this bind workaround into EHCI iMX5 driver as well.
Signed-off-by: Marek Vasut marex@denx.de Cc: Abel Vesa abel.vesa@nxp.com Cc: Adam Ford aford173@gmail.com Cc: Fabio Estevam festevam@gmail.com Cc: Ludwig Zenz lzenz@dh-electronics.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Vagrant Cascadian vagrant@debian.org --- drivers/usb/host/ehci-mx5.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c index 0b32728c57..4db513f4e5 100644 --- a/drivers/usb/host/ehci-mx5.c +++ b/drivers/usb/host/ehci-mx5.c @@ -301,6 +301,22 @@ static int ehci_usb_ofdata_to_platdata(struct udevice *dev) return 0; }
+static int ehci_usb_bind(struct udevice *dev) +{ + static int num_controllers; + + /* + * Without this hack, if we return ENODEV for USB Controller 0, on + * probe for the next controller, USB Controller 1 will be given a + * sequence number of 0. This conflicts with our requirement of + * sequence numbers while initialising the peripherals. + */ + dev->req_seq = num_controllers; + num_controllers++; + + return 0; +} + static int ehci_usb_probe(struct udevice *dev) { struct usb_platdata *plat = dev_get_platdata(dev); @@ -362,6 +378,7 @@ U_BOOT_DRIVER(usb_mx5) = { .id = UCLASS_USB, .of_match = mx5_usb_ids, .ofdata_to_platdata = ehci_usb_ofdata_to_platdata, + .bind = ehci_usb_bind, .probe = ehci_usb_probe, .remove = ehci_deregister, .ops = &ehci_usb_ops,