On Sun, Oct 22, 2017 at 11:08:43PM +0300, Artturi Alm wrote:
Hi,
this has been 'blocking' my attempts to revive the A10-boards i have since early june, or so.
now i found this commit abc3e4df59f54cf3dda42a35a75d617fe861f5fe, which left the drivers/net/Makefile untouched, essentially breaking sunxi_emac.
the diff below didn't fix it however, i can see how it does arp who-has, and the remote replying, but u-boot does act as if nothing is received back?
-Artturi
ping? apparently i forgot to cc anyone at first try.
-Artturi
U-Boot SPL 2017.11-rc2-00002-g24b253e-dirty (Oct 22 2017 - 22:07:19) DRAM: 1024 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1
U-Boot 2017.11-rc2-00002-g24b253e-dirty (Oct 22 2017 - 22:07:19 +0300) Allwinner Technology
CPU: Allwinner A10 (SUN4I) Model: Cubietech Cubieboard I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c0b000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 => env set ipaddr 192.168.2.10 => ping 192.168.2.2 resetting device ENET Speed is 100 Mbps - FULL duplex connection Using ethernet@01c0b000 device
ARP Retry count exceeded; starting again ping failed; host 192.168.2.2 is not alive =>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d67927c..2e35563 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -219,6 +219,7 @@ config SUN7I_GMAC config SUN4I_EMAC bool "Allwinner Sun4i Ethernet MAC support" depends on DM_ETH
select PHYLIBdiff --git a/drivers/net/Makefile b/drivers/net/Makefile index 94a4fd8..ac5443c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_E1000) += e1000.o obj-$(CONFIG_E1000_SPI) += e1000_spi.o obj-$(CONFIG_EEPRO100) += eepro100.o -obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o +obj-$(CONFIG_SUN4I_EMAC) += sunxi_emac.o obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_EP93XX) += ep93xx_eth.o diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 9175117..b12f7e1 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -291,7 +291,7 @@ extern int soft_i2c_gpio_scl; #endif /* CONFIG_VIDEO */
/* Ethernet support */ -#ifdef CONFIG_SUNXI_EMAC +#ifdef CONFIG_SUN4I_EMAC #define CONFIG_PHY_ADDR 1 #define CONFIG_MII /* MII PHY management */ #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 3037d61..82b927c 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2272,7 +2272,6 @@ CONFIG_STV0991_HZ CONFIG_STV0991_HZ_CLOCK CONFIG_ST_SMI CONFIG_SUNXI_AHCI -CONFIG_SUNXI_EMAC CONFIG_SUNXI_GPIO CONFIG_SUNXI_MAX_FB_SIZE CONFIG_SUNXI_USB_PHYS