From: Yuan Yao yao.yuan@nxp.com
QSPI controller automatic enable the chipselect signal according the dest AMBA memory address. Now we distribute the AMBA memory zone averagely to every chipselect slave device according chipselect numbers got from dts node.
Signed-off-by: Yuan Yao yao.yuan@freescale.com Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com Signed-off-by: Yuan Yao yao.yuan@nxp.com --- drivers/spi/fsl_qspi.c | 55 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 43 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c index 96fb909..db7ebee 100644 --- a/drivers/spi/fsl_qspi.c +++ b/drivers/spi/fsl_qspi.c @@ -927,10 +927,11 @@ static int fsl_qspi_child_pre_probe(struct udevice *dev)
static int fsl_qspi_probe(struct udevice *bus) { - u32 total_size; + u32 amba_size_per_chip; struct fsl_qspi_platdata *plat = dev_get_platdata(bus); struct fsl_qspi_priv *priv = dev_get_priv(bus); struct dm_spi_bus *dm_spi_bus; + int i;
dm_spi_bus = bus->uclass_priv;
@@ -956,7 +957,22 @@ static int fsl_qspi_probe(struct udevice *bus) qspi_cfg_smpr(priv, ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK | QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
- total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM; + /* + * Assign AMBA memory zone for every chipselect + * QuadSPI has two channels, every channel has two chipselects. + * If the property 'num-cs' in dts is 2, the AMBA memory will be divided + * into two parts and assign to every channel. This indicate that every + * channel only has one valid chipselect. + * If the property 'num-cs' in dts is 4, the AMBA memory will be divided + * into four parts and assign to every chipselect. + * Every channel will has two valid chipselects. + */ + amba_size_per_chip = priv->amba_total_size >> + (priv->num_chipselect >> 1); + for (i = 1 ; i < priv->num_chipselect ; i++) + priv->amba_base[i] = + amba_size_per_chip + priv->amba_base[i - 1]; + /* * Any read access to non-implemented addresses will provide * undefined results. @@ -967,14 +983,30 @@ static int fsl_qspi_probe(struct udevice *bus) * setting the size of these devices to 0. This would ensure * that the complete memory map is assigned to only one flash device. */ - qspi_write32(priv->flags, &priv->regs->sfa1ad, - FSL_QSPI_FLASH_SIZE | priv->amba_base[0]); - qspi_write32(priv->flags, &priv->regs->sfa2ad, - FSL_QSPI_FLASH_SIZE | priv->amba_base[0]); - qspi_write32(priv->flags, &priv->regs->sfb1ad, - total_size | priv->amba_base[0]); - qspi_write32(priv->flags, &priv->regs->sfb2ad, - total_size | priv->amba_base[0]); + qspi_write32(priv->flags, &priv->regs->sfa1ad, priv->amba_base[1]); + switch (priv->num_chipselect) { + case 2: + qspi_write32(priv->flags, &priv->regs->sfa2ad, + priv->amba_base[1]); + qspi_write32(priv->flags, &priv->regs->sfb1ad, + priv->amba_base[1] + amba_size_per_chip); + qspi_write32(priv->flags, &priv->regs->sfb2ad, + priv->amba_base[1] + amba_size_per_chip); + break; + case 4: + qspi_write32(priv->flags, &priv->regs->sfa2ad, + priv->amba_base[2]); + qspi_write32(priv->flags, &priv->regs->sfb1ad, + priv->amba_base[3]); + qspi_write32(priv->flags, &priv->regs->sfb2ad, + priv->amba_base[3] + amba_size_per_chip); + break; + default: + debug("Error: Unsupported chipselect number %u!\n", + priv->num_chipselect); + qspi_module_disable(priv, 1); + return -EINVAL; + }
qspi_set_lut(priv);
@@ -1063,8 +1095,7 @@ static int fsl_qspi_claim_bus(struct udevice *dev) bus = dev->parent; priv = dev_get_priv(bus);
- priv->cur_amba_base = - priv->amba_base[0] + FSL_QSPI_FLASH_SIZE * slave_plat->cs; + priv->cur_amba_base = priv->amba_base[slave_plat->cs];
qspi_module_disable(priv, 0);