On 2019/10/2 上午5:23, Heiko Stuebner wrote:
From: Joseph Chen chenjh@rock-chips.com
Trusted-Firmware can also initialize a secure payload to use as a trusted execution environment. In general for the arm64 case this is provided as separate image and uboot is supposed to also place it in a predetermined location in memory and add the necessary parameters to the ATF boot params.
So add the possibility to get this tee payload from the provided FIT image and setup things as necessary.
Tested on a Rockchip PX30 with mainline TF-A, mainline OP-Tee (with pending PX30 support) and mainline 5.4-rc1 Linux kernel.
Signed-off-by: Joseph Chen chenjh@rock-chips.com Signed-off-by: Heiko Stuebner heiko@sntech.de
Reviewed-by: Kever Yangkever.yang@rock-chips.com
Thanks, - Kever
common/spl/spl_atf.c | 46 ++++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 14 deletions(-)
diff --git a/common/spl/spl_atf.c b/common/spl/spl_atf.c index 4715f9d371..41b7dbd769 100644 --- a/common/spl/spl_atf.c +++ b/common/spl/spl_atf.c @@ -30,8 +30,10 @@ static struct bl31_params *bl2_to_bl31_params;
- @return bl31 params structure pointer
*/ -static struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl33_entry) +static struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl32_entry,
uintptr_t bl33_entry){
struct entry_point_info *bl32_ep_info; struct entry_point_info *bl33_ep_info;
/*
@@ -49,16 +51,21 @@ static struct bl31_params *bl2_plat_get_bl31_params(uintptr_t bl33_entry) SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0);
- /* Fill BL32 related information if it exists */
- /* Fill BL32 related information */ bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, ATF_PARAM_EP,
ATF_VERSION_1, 0);
- bl32_ep_info = &bl31_params_mem.bl32_ep_info;
- SET_PARAM_HEAD(bl32_ep_info, ATF_PARAM_EP, ATF_VERSION_1,
ATF_EP_SECURE);- /* secure payload is optional, so set pc to 0 if absent */
- bl32_ep_info->pc = bl32_entry ? bl32_entry : 0;
- bl32_ep_info->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
DISABLE_ALL_EXECPTIONS);- bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info; SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0);
-#ifndef BL32_BASE
- bl2_to_bl31_params->bl32_ep_info->pc = 0;
-#endif /* BL32_BASE */
/* Fill BL33 related information */ bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info; @@ -86,13 +93,13 @@ static inline void raw_write_daif(unsigned int daif)
typedef void (*atf_entry_t)(struct bl31_params *params, void *plat_params);
-static void bl31_entry(uintptr_t bl31_entry, uintptr_t bl33_entry,
uintptr_t fdt_addr)+static void bl31_entry(uintptr_t bl31_entry, uintptr_t bl32_entry,
uintptr_t bl33_entry, uintptr_t fdt_addr)
- bl31_params = bl2_plat_get_bl31_params(bl33_entry);
bl31_params = bl2_plat_get_bl31_params(bl32_entry, bl33_entry);
raw_write_daif(SPSR_EXCEPTION_MASK); dcache_disable();
@@ -100,7 +107,7 @@ static void bl31_entry(uintptr_t bl31_entry, uintptr_t bl33_entry, atf_entry((void *)bl31_params, (void *)fdt_addr); }
-static int spl_fit_images_find_uboot(void *blob) +static int spl_fit_images_find(void *blob, int os) { int parent, node, ndepth; const void *data; @@ -122,7 +129,7 @@ static int spl_fit_images_find_uboot(void *blob) if (!data) continue;
if (genimg_get_os_id(data) == IH_OS_U_BOOT)
if (genimg_get_os_id(data) == os) return node;@@ -143,11 +150,21 @@ uintptr_t spl_fit_images_get_entry(void *blob, int node)
void spl_invoke_atf(struct spl_image_info *spl_image) {
uintptr_t bl32_entry = 0; uintptr_t bl33_entry = CONFIG_SYS_TEXT_BASE; void *blob = spl_image->fdt_addr; uintptr_t platform_param = (uintptr_t)blob; int node;
/*
* Find the OP-TEE binary (in /fit-images) load address or* entry point (if different) and pass it as the BL3-2 entry* point, this is optional.*/node = spl_fit_images_find(blob, IH_OS_TEE);
if (node >= 0)
bl32_entry = spl_fit_images_get_entry(blob, node);/*
- Find the U-Boot binary (in /fit-images) load addreess or
- entry point (if different) and pass it as the BL3-3 entry
@@ -155,7 +172,7 @@ void spl_invoke_atf(struct spl_image_info *spl_image) * This will need to be extended to support Falcon mode. */
- node = spl_fit_images_find_uboot(blob);
- node = spl_fit_images_find(blob, IH_OS_U_BOOT); if (node >= 0) bl33_entry = spl_fit_images_get_entry(blob, node);
@@ -172,5 +189,6 @@ void spl_invoke_atf(struct spl_image_info *spl_image) * We don't provide a BL3-2 entry yet, but this will be possible * using similar logic. */
- bl31_entry(spl_image->entry_point, bl33_entry, platform_param);
- bl31_entry(spl_image->entry_point, bl32_entry,
bl33_entry, platform_param);