This driver is not used anymore. Drop it.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/misc/Makefile | 1 - drivers/misc/status_led.c | 124 -------------------------------------- 2 files changed, 125 deletions(-) delete mode 100644 drivers/misc/status_led.c
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 03d87ef8a0e..cf6ece919bc 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -48,7 +48,6 @@ obj-$(CONFIG_$(SPL_)I2C_EEPROM) += i2c_eeprom.o obj-$(CONFIG_IHS_FPGA) += ihs_fpga.o obj-$(CONFIG_IMX8) += imx8/ obj-$(CONFIG_IMX_ELE) += imx_ele/ -obj-$(CONFIG_LED_STATUS) += status_led.o obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o obj-$(CONFIG_$(SPL_TPL_)LS2_SFP) += ls2_sfp.o obj-$(CONFIG_$(SPL_)MXC_OCOTP) += mxc_ocotp.o diff --git a/drivers/misc/status_led.c b/drivers/misc/status_led.c deleted file mode 100644 index 3b1baa4f840..00000000000 --- a/drivers/misc/status_led.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include <status_led.h> -#include <linux/types.h> - -/* - * The purpose of this code is to signal the operational status of a - * target which usually boots over the network; while running in - * U-Boot, a status LED is blinking. As soon as a valid BOOTP reply - * message has been received, the LED is turned off. The Linux - * kernel, once it is running, will start blinking the LED again, - * with another frequency. - */ - -/* ------------------------------------------------------------------------- */ - -typedef struct { - led_id_t mask; - int state; - int period; - int cnt; -} led_dev_t; - -led_dev_t led_dev[] = { - { CONFIG_LED_STATUS_BIT, - CONFIG_LED_STATUS_STATE, - LED_STATUS_PERIOD, - 0, - }, -#if defined(CONFIG_LED_STATUS1) - { CONFIG_LED_STATUS_BIT1, - CONFIG_LED_STATUS_STATE1, - LED_STATUS_PERIOD1, - 0, - }, -#endif -#if defined(CONFIG_LED_STATUS2) - { CONFIG_LED_STATUS_BIT2, - CONFIG_LED_STATUS_STATE2, - LED_STATUS_PERIOD2, - 0, - }, -#endif -#if defined(CONFIG_LED_STATUS3) - { CONFIG_LED_STATUS_BIT3, - CONFIG_LED_STATUS_STATE3, - LED_STATUS_PERIOD3, - 0, - }, -#endif -#if defined(CONFIG_LED_STATUS4) - { CONFIG_LED_STATUS_BIT4, - CONFIG_LED_STATUS_STATE4, - LED_STATUS_PERIOD4, - 0, - }, -#endif -#if defined(CONFIG_LED_STATUS5) - { CONFIG_LED_STATUS_BIT5, - CONFIG_LED_STATUS_STATE5, - LED_STATUS_PERIOD5, - 0, - }, -#endif -}; - -#define MAX_LED_DEV (sizeof(led_dev)/sizeof(led_dev_t)) - -static int status_led_init_done = 0; - -void status_led_init(void) -{ - led_dev_t *ld; - int i; - - for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) - __led_init (ld->mask, ld->state); - status_led_init_done = 1; -} - -void status_led_tick(ulong timestamp) -{ - led_dev_t *ld; - int i; - - if (!status_led_init_done) - status_led_init(); - - for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) { - - if (ld->state != CONFIG_LED_STATUS_BLINKING) - continue; - - if (++ld->cnt >= ld->period) { - __led_toggle (ld->mask); - ld->cnt -= ld->period; - } - - } -} - -void status_led_set(int led, int state) -{ - led_dev_t *ld; - - if (led < 0 || led >= MAX_LED_DEV) - return; - - if (!status_led_init_done) - status_led_init(); - - ld = &led_dev[led]; - - ld->state = state; - if (state == CONFIG_LED_STATUS_BLINKING) { - ld->cnt = 0; /* always start with full period */ - state = CONFIG_LED_STATUS_ON; /* always start with LED _ON_ */ - } - __led_set (ld->mask, state); -}