28 May
2008
28 May
'08
8:25 p.m.
On Wed, May 28, 2008 at 08:12:28PM +0200, Wolfgang Grandegger wrote:
This patch adds support for NAND FLASH on the TQM8548. It is disabled by default and can be enabled for the TQM8548 modules. Note that the R/B pin is not supported by that module requiring to use the specified maximum delay time.
Note: With NAND support enabled the size of the U-Boot image exceeds 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk, doubling the image size :-(.
What does this do differently from the code in drivers/mtd/nand/fsl_upm.c?
How much of this is board-specific?
-Scott