Hi Kever,
On 2024-03-14 08:33, Kever Yang wrote:
Hi Jonas,
On 2024/3/14 15:04, Jonas Karlman wrote:
Hi Kever,
On 2024-03-14 07:58, Kever Yang wrote:
On 2024/2/1 06:08, Jonas Karlman wrote:
Add a minimal generic RK3588S/RK3588 board that only have eMMC and SDMMC enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3588S/RK3588 boards that follow reference board design.
Also fix the alphabetical order of RK3588 boards listed in Makefile and documentation.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Since rk356x already have a generic board, rk3588 can also have one.
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, I will send a v2 with an updated defconfig to take advantage of the new ROCKCHIP_COMMON_STACK_ADDR bss and stack addresses.
I have fix this and also other new boards defconfig, so you don't need to do this.
Great, thanks!
Regards, Jonas
Thanks,
- Kever
Regards, Jonas
Thanks,
- Kever
This patch depend on the series "rockchip: rk35xx: Sync device tree with linux v6.8-rc1" [1].
[1] https://patchwork.ozlabs.org/cover/1891669/
arch/arm/dts/Makefile | 5 +- arch/arm/dts/rk3588-generic-u-boot.dtsi | 3 ++ arch/arm/dts/rk3588-generic.dts | 44 ++++++++++++++++ board/rockchip/evb_rk3588/MAINTAINERS | 7 +++ configs/generic-rk3588_defconfig | 68 +++++++++++++++++++++++++ doc/board/rockchip/rockchip.rst | 3 +- 6 files changed, 127 insertions(+), 3 deletions(-) create mode 100644 arch/arm/dts/rk3588-generic-u-boot.dtsi create mode 100644 arch/arm/dts/rk3588-generic.dts create mode 100644 configs/generic-rk3588_defconfig
[snip]