From: Kongyang Liu seashell11234455@gmail.com
Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by: Kongyang Liu seashell11234455@gmail.com Signed-off-by: Huan Zhou pericycle.cc@gmail.com --- doc/board/index.rst | 1 + doc/board/spacemit/bananapi-f3.rst | 86 ++++++++++++++++++++++++++++++++++++++ doc/board/spacemit/index.rst | 9 ++++ 3 files changed, 96 insertions(+)
diff --git a/doc/board/index.rst b/doc/board/index.rst index 417c128c7af6ad2267ef1bc743c7f10ae70b6de7..367da2d62316d4cab25ecc53f852ef742eba13dd 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -51,6 +51,7 @@ Board-specific doc sipeed/index socionext/index sophgo/index + spacemit/index st/index starfive/index ste/index diff --git a/doc/board/spacemit/bananapi-f3.rst b/doc/board/spacemit/bananapi-f3.rst new file mode 100644 index 0000000000000000000000000000000000000000..98a1b1d91daa897508762267e8363e7d98a0c5d0 --- /dev/null +++ b/doc/board/spacemit/bananapi-f3.rst @@ -0,0 +1,86 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Banana Pi BPI-F3 +============ + +Building +~~~~~~~~ +1. Install the spacemit riscv cross compile toolchain_, or skip it if riscv toolchain is installed. + +.. _toolchain: https://archive.spacemit.com/toolchain/ + +2. Setup cross compilation environment variable: + +.. code-block:: console + + export CROSS_COMPILE=<riscv64 toolchain prefix, e.g /opt/spacemit/bin/riscv64-unknown-linux-gnu-> + +3. Before building U-Boot, OpenSBI should be built first. OpenSBI can be +built for SpacemiT K1 SoC as below: + +.. code-block:: console + + git clone https://github.com/cyyself/opensbi -b k1-opensbi + cd opensbi + make PLATFORM=generic + +4. Then build U-Boot as following: + +.. code-block:: console + + cd <U-Boot-dir> + make bananapi-f3_defconfig + make OPENSBI=<OpenSBI-dir>/build/platform/generic/firmware/fw_dynamic.bin + +This will generate u-boot.itb + +Booting +~~~~~~~ +Actually, we can replace the uboot part from bianbu linux which is the bsp_ to validate this patch, +use `balena etcher` to burn the bianbu-minimal.img to the sd card, +and replace the /dev/sdx4 where places the uboot_ with the `u-boot.itb` generated from this patch. + +.. _bsp: https://archive.spacemit.com/image/k1/version/bianbu/v2.0/ +.. _uboot: https://bianbu-linux.spacemit.com/en/device/boot#21-firmware-layout + +Sample boot log from Banana Pi BPI-F3 board +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. code-block:: none + + try sd... + bm:3 + j... + + U-Boot SPL 2022.10spacemit-dirty (Oct 21 2024 - 09:01:13 +0000) + [ 0.279] DDR type LPDDR4X + [ 0.292] lpddr4_silicon_init consume 13ms + [ 0.293] Change DDR data rate to 2400MT/s + [ 0.430] ## Checking hash(es) for config conf-1 ... OK + [ 0.432] ## Checking hash(es) for Image opensbi ... OK + [ 0.437] ## Checking hash(es) for Image uboot ... OK + [ 0.443] ## Checking hash(es) for Image fdt-1 ... OK + [ 0.488] ## Checking hash(es) for config config_1 ... OK + [ 0.490] ## Checking hash(es) for Image opensbi ... crc32+ OK + + + U-Boot 2024.10-rc4-00462-g5b138cfcc587-dirty (Nov 28 2024 - 14:56:49 +0800) + + DRAM: 4 GiB + Core: 19 devices, 8 uclasses, devicetree: separate + Loading Environment from nowhere... OK + In: serial@d4017000 + Out: serial@d4017000 + Err: serial@d4017000 + Net: No ethernet found. + => cpu list + 0: cpu@0 spacemit,x60 + 1: cpu@1 spacemit,x60 + 2: cpu@2 spacemit,x60 + 3: cpu@3 spacemit,x60 + 4: cpu@4 spacemit,x60 + 5: cpu@5 spacemit,x60 + 6: cpu@6 spacemit,x60 + 7: cpu@7 spacemit,x60 + => test + => + diff --git a/doc/board/spacemit/index.rst b/doc/board/spacemit/index.rst new file mode 100644 index 0000000000000000000000000000000000000000..e7d3d94e4599fbeb8da16c8a837e777a0be06227 --- /dev/null +++ b/doc/board/spacemit/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +SpacemiT +======== +.. toctree:: + :maxdepth: 1 + + bananapi-f3 +