On Thu, Nov 1, 2018 at 2:22 AM Marek Vasut marek.vasut@gmail.com wrote:
The TMIO core has a quirk where divider == 1 must not be set in DDR modes. Handle this by setting divider to 2, as suggested in the documentation.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com
drivers/mmc/tmio-common.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 9eb2984ed3..072171d4b3 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -565,6 +565,10 @@ static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv,
divisor = DIV_ROUND_UP(mclk, mmc->clock);
/* Do not set divider to 0xff in DDR mode */if (mmc->ddr_mode && (divisor == 1))divisor = 2;
With this patch applied, my board would not boot any more.
Please stop adding Renesas-specific quirks to tmio-common.
By moving tmio_sd_set_clk_rate to a platform hook, you can do anything you want to do in renesas-sdhi.c
if (divisor <= 1) val = (priv->caps & TMIO_SD_CAP_RCAR) ? TMIO_SD_CLKCTL_RCAR_DIV1 : TMIO_SD_CLKCTL_DIV1;-- 2.18.0
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
-- Best Regards Masahiro Yamada