Re: [U-Boot] [U-Boot, V2] arm: omap: emif: Fix DDR3 init after warm reset

On Wed, Mar 27, 2013 at 08:24:42PM -0000, Lokesh Vutla wrote:

EMIF supports a global warm reset mode, during which the EMIF keeps the SDRAM content. But if leveling is enabled at the time of warm reset for DDR3, the following steps needs to be done after warm reset:

1. Keep EMIF in self refresh mode.
2. Reset PHY to bring back the PHY to a known state.
3. Start Levelling procedure.

Doing the same. And also enabling DLL lock and code output after warm reset.

Tested on OMAP5432 ES2.0

Signed-off-by: Lokesh Vutla lokeshvutla@ti.com

Applied to u-boot-ti/master, thanks!