On 3/24/22 22:17, Tom Rini wrote:
The value CONFIG_DB_784MP_GP is only used in the DDR code to refer to CONFIG_TARGET_DB_MV784MP_GP so just use that second value directly.
Cc: Stefan Roese sr@denx.de Signed-off-by: Tom Rini trini@konsulko.com
Reviewed-by: Stefan Roese sr@denx.de
Thanks, Stefan
arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 2 +- drivers/ddr/marvell/axp/ddr3_axp.h | 2 +- drivers/ddr/marvell/axp/ddr3_axp_config.h | 2 +- include/configs/db-mv784mp-gp.h | 5 ----- 4 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index 0b63664dd8be..68f8eade2722 100644 --- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c @@ -62,7 +62,7 @@ static u32 board_id_get(void) return DB_78X60_AMC_ID; #elif defined(CONFIG_DB_78X60_PCAC_REV2) return DB_78X60_PCAC_REV2_ID; -#elif defined(CONFIG_DB_784MP_GP) +#elif defined(CONFIG_TARGET_DB_MV784MP_GP) return DB_784MP_GP_ID; #elif defined(CONFIG_RD_78460_CUSTOMER) return RD_78460_CUSTOMER_ID; diff --git a/drivers/ddr/marvell/axp/ddr3_axp.h b/drivers/ddr/marvell/axp/ddr3_axp.h index 970651f87029..a14c766dda71 100644 --- a/drivers/ddr/marvell/axp/ddr3_axp.h +++ b/drivers/ddr/marvell/axp/ddr3_axp.h @@ -37,7 +37,7 @@ #define ECC_SUPPORT #endif #define NEW_FABRIC_TWSI_ADDR 0x4E -#ifdef CONFIG_DB_784MP_GP +#ifdef CONFIG_TARGET_DB_MV784MP_GP #define BUS_WIDTH_ECC_TWSI_ADDR 0x4E #else #define BUS_WIDTH_ECC_TWSI_ADDR 0x4F diff --git a/drivers/ddr/marvell/axp/ddr3_axp_config.h b/drivers/ddr/marvell/axp/ddr3_axp_config.h index 437a02efbac9..ab09e72623a0 100644 --- a/drivers/ddr/marvell/axp/ddr3_axp_config.h +++ b/drivers/ddr/marvell/axp/ddr3_axp_config.h @@ -138,7 +138,7 @@
- Enables I2C auto detection different options
*/ #if defined(CONFIG_DB_88F78X60) || defined(CONFIG_DB_88F78X60_REV2) || \
- defined(CONFIG_DB_784MP_GP)
- defined(CONFIG_TARGET_DB_MV784MP_GP) #define AUTO_DETECTION_SUPPORT #endif #endif
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 41d469d79526..d6850bd32e72 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -6,11 +6,6 @@ #ifndef _CONFIG_DB_MV7846MP_GP_H #define _CONFIG_DB_MV7846MP_GP_H
-/*
- High Level Configuration Options (easy to change)
- */
-#define CONFIG_DB_784MP_GP /* Board target name for DDR training */
- /*
- TEXT_BASE needs to be below 16MiB, since this area is scrubbed
- for DDR ECC byte filling in the SPL before loading the main
Viele Grüße, Stefan Roese