On 11/6/22 2:49 AM, Heinrich Schuchardt wrote:
On 11/1/22 15:06, Andrew Davis wrote:
On 10/7/22 6:47 PM, Heinrich Schuchardt wrote:
On 10/7/22 22:37, Andrew Davis wrote:
J721e needs DM firmware when using updated SYSFW. Add steps to fetch, build, and deploy the same.
Signed-off-by: Andrew Davis afd@ti.com
doc/board/ti/j721e_evm.rst | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst index 44dc316afd..a7d7229722 100644 --- a/doc/board/ti/j721e_evm.rst +++ b/doc/board/ti/j721e_evm.rst @@ -142,7 +142,11 @@ Sources: Tree: https://github.com/OP-TEE/optee_os.git Branch: master
-4. U-Boot: +4. DM:
DM in the context of U-Boot is used as abbreviation for driver model.
Please, provide a meaningful title.
Will rename to "DM Firmware" for v3.
Thanks, Andrew
Best regards
Heinrich
+ Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git + Branch: ti-linux-firmware
+5. U-Boot: Tree: https://source.denx.de/u-boot/u-boot Branch: master
@@ -152,7 +156,7 @@ Build procedure:
.. code-block:: text
Thanks for updating the documentation.
The code-blocks look like bash and not text. Please, correct this information to allow syntax highlighting.
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
- $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
Please, remove the leading $-signs which are not helpful when copying to the console.
Please indent code blocks by 4 spaces. Otherwise Sphinx cannot recognize them.
Will fix all the code blocks then in a single patch, add it to this as a follow up in a series.
Thanks, Andrew
Best regards
Heinrich
2. ATF:
@@ -172,15 +176,15 @@ Build procedure:
.. code-block:: text
- $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig
O=/tmp/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig
O=build/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
* 4.2 A72:
.. code-block:: text
- $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig
O=/tmp/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF
dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig
O=build/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF
dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
Target Images --------------