[U-Boot] new board SDRAM conf

Hi!,

I’m using ppc440Ep and using u-boot1.3.3

I’m using u-boot1.1.3 with Yosemite configuration.

When I boot with Yosemite conf , it stops SDRAM:256 , it’ shows cpu, pci conf

My New Board configuration is only different SDRAM Size and Flash Size.

Where can I modify my Yosemite configuration.

Init.S and Yosemite.h

Best Regards,

J

###### Yosemite Cofiguration #####################

FLASH (CS0)

64MEGA Boot Flash

SDRAM

bank 0- 128MB

bank 1- 128MB

!!!###### My Board #####################

FLASH (CS0)

8MEGA Boot Flash

SDRAM

bank 0- 128MB

bank 1- NONE