On Tue, Oct 5, 2021 at 7:35 AM Adam Ford aford173@gmail.com wrote:
On Mon, Sep 20, 2021 at 11:14 AM Adam Ford aford173@gmail.com wrote:
There are three boards from Beacon, RZ/G2 M/N/H which all use the same board file, but different device trees. Add code to automatically select the proper device tree based on the CPU type.
Signed-off-by: Adam Ford aford173@gmail.com
Marek,
You previously asked me to remind you after 2 weeks, so it doesn't get too stale. I rebased at the time I did the V2. Can you give feedback?
Marek,
Ping #2. It's been three weeks since my last ping, and I was hoping you might have some feedback and/or be able to apply this.
thank you,
adam
thank you,
adam
board/beacon/beacon-rzg2m/beacon-rzg2m.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/board/beacon/beacon-rzg2m/beacon-rzg2m.c b/board/beacon/beacon-rzg2m/beacon-rzg2m.c index c12ff77fb2..b3521fcbc1 100644 --- a/board/beacon/beacon-rzg2m/beacon-rzg2m.c +++ b/board/beacon/beacon-rzg2m/beacon-rzg2m.c @@ -36,3 +36,19 @@ void reset_cpu(void) { writel(RST_CODE, RST_CA57RESCNT); }
+#if IS_ENABLED(CONFIG_MULTI_DTB_FIT) +int board_fit_config_name_match(const char *name) +{
if (!strcmp(rzg_get_cpu_name(), "R8A774A1") && !strcmp(name, "r8a774a1-beacon-rzg2m-kit"))return 0;if (!strcmp(rzg_get_cpu_name(), "R8A774B1") && !strcmp(name, "r8a774b1-beacon-rzg2n-kit"))return 0;if (!strcmp(rzg_get_cpu_name(), "R8A774E1") && !strcmp(name, "r8a774e1-beacon-rzg2h-kit"))return 0;return -1;+}
+#endif
2.25.1