Re: [U-Boot-Users] Re: problems with the strataflash driver in U-boot

Josh,

no dice. here's the configuration in chip terms, followed by my config settings, followed by the driver ouput.

suggestions?

I might be pointing the obvious but did you take out older strataflash.c/o from your board Makefile? If not there can be conflict! Do a "make mrproper" first so that dependencies are generated properly as well.

I used Brad's latest driver in 2x16bit(chipwidth)=32bit bus configuration (using Intel 28F128J3) without any problem.

Best regards, Tolunay