Re: [U-Boot] [PATCH] MX28: mx28evk: Follow m28evk change in SSP clock

Dear Otavio Salvador,

This changes the board config to follow m28evk board configuration.

Signed-off-by: Otavio Salvador otavio@ossystems.com.br

board/freescale/mx28evk/mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -49,8 +49,8 @@ int board_early_init_f(void)

/* SSP0 clock at 96MHz */ mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);

• /* SSP2 clock at 96MHz */
• mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);

• /* SSP2 clock at 160MHz */
• mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);

You _MUST_ also adjust the default SPI flash sleep, otherwise this is flat pointless change

#ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);

Best regards, Marek Vasut