Hi,
I built with ecovec board.
you can check command following : make CROSS_COMPILE=sh-linux-gnu- ecovec_config make CROSS_COMPILE=sh-linux-gnu-
Best regards, Nobuhiro
2012/2/16 Mike Frysinger vapier@gentoo.org:
On Wednesday 15 February 2012 02:51:40 Nobuhiro Iwamatsu wrote:
2012/2/3 Mike Frysinger:
On Friday 03 February 2012 02:30:48 Nobuhiro Iwamatsu wrote:
static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v) {
- int port;
struct sh_eth_dev *eth = bus->priv;
- int port = eth->port;
- port = eth->port;
if (v) outl(inl(PIR(port)) | PIR_MDC, PIR(port));
i don't see why any of these changes are necessary ... the old code looks fine to me (from a warning and style pov)
I do not seem to have any problem with the former cord, too either. But when I dont apply this patch, I get the following warning.
sh_eth.c: In function ‘sh_eth_bb_set_mdc’: sh_eth.c:611: warning: unused variable ‘port’
you've got a different problem then and modifying the sh_eth driver ignores it
what board are you building for exactly ? -mike
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot