From: Andre Przywara andre.przywara@arm.com
It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant.
It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen.
The board defconfigs stay untouched.
Signed-off-by: Andre Przywara andre.przywara@arm.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Jagan Teki jagan@openedev.com [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- board/sunxi/Makefile | 3 --- drivers/ata/Kconfig | 8 ++++++++ drivers/ata/Makefile | 1 + board/sunxi/ahci.c => drivers/ata/ahci_sunxi.c | 10 ---------- include/configs/sunxi-common.h | 6 ------ scripts/config_whitelist.txt | 1 - 6 files changed, 9 insertions(+), 20 deletions(-) rename board/sunxi/ahci.c => drivers/ata/ahci_sunxi.c (94%)
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 4d6258d932..c4e13f8c38 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -8,9 +8,6 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. obj-y += board.o obj-$(CONFIG_SUN7I_GMAC) += gmac.o -ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SUNXI_AHCI) += ahci.o -endif obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 49a056e941..b7addaf785 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -99,6 +99,14 @@ config SATA_SIL3114 help Enable this driver to support the SIL3114 SATA controllers.
+config SUNXI_AHCI + bool "Enable Allwinner SATA driver support" + depends on AHCI + default y if ARCH_SUNXI + help + Enable this driver to support the SATA controllers found in the + Allwinner A10, A20 and R40 SoCs. + config AHCI_MVEBU bool "Marvell EBU AHCI SATA support" depends on ARCH_MVEBU diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 10bed53bb3..a69edb10f7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_SANDBOX) += sata_sandbox.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o +obj-$(CONFIG_SUNXI_AHCI) += ahci_sunxi.o diff --git a/board/sunxi/ahci.c b/drivers/ata/ahci_sunxi.c similarity index 94% rename from board/sunxi/ahci.c rename to drivers/ata/ahci_sunxi.c index 9b03013667..77b932aa03 100644 --- a/board/sunxi/ahci.c +++ b/drivers/ata/ahci_sunxi.c @@ -70,15 +70,6 @@ static int sunxi_ahci_phy_init(u8 *reg_base) return 0; }
-#ifndef CONFIG_DM_SCSI -void scsi_init(void) -{ - if (sunxi_ahci_phy_init((u8 *)SUNXI_SATA_BASE) < 0) - return; - - ahci_init((void __iomem *)SUNXI_SATA_BASE); -} -#else static int sunxi_sata_probe(struct udevice *dev) { ulong base; @@ -132,4 +123,3 @@ U_BOOT_DRIVER(ahci_sunxi_drv) = { .bind = sunxi_sata_bind, .probe = sunxi_sata_probe, }; -#endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index b01d1c3c84..bc30994029 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -104,13 +104,7 @@ #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
#ifdef CONFIG_AHCI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SUNXI_AHCI #define CONFIG_SYS_64BIT_LBA -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #endif
#define CONFIG_SETUP_MEMORY_TAGS diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 8c7c1592a5..c58b964065 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1939,7 +1939,6 @@ CONFIG_STV0991 CONFIG_STV0991_HZ CONFIG_STV0991_HZ_CLOCK CONFIG_ST_SMI -CONFIG_SUNXI_AHCI CONFIG_SUNXI_GPIO CONFIG_SUNXI_MAX_FB_SIZE CONFIG_SUPERH_ON_CHIP_R8A66597