With this patch sun8i_emac can now get the MAC address from the board in a predetermined board specific manner.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl --- drivers/net/Makefile | 2 +- drivers/net/sun8i_emac.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 5df5567536..8464062d83 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_E1000_SPI) += e1000_spi.o obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_SUN4I_EMAC) += sunxi_common.o sun4i_mac.o obj-$(CONFIG_SUN7I_MAC) += sunxi_common.o sun7i_mac.o -obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o +obj-$(CONFIG_SUN8I_EMAC) += sunxi_common.o sun8i_emac.o obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_EP93XX) += ep93xx_eth.o obj-$(CONFIG_ETHOC) += ethoc.o diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index a3dbe2823b..5093f9c83d 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -25,6 +25,8 @@ #include <asm-generic/gpio.h> #endif
+#include "sunxi_common.h" + #define MDIO_CMD_MII_BUSY BIT(0) #define MDIO_CMD_MII_WRITE BIT(1)
@@ -757,6 +759,7 @@ static int sun8i_emac_eth_probe(struct udevice *dev) static const struct eth_ops sun8i_emac_eth_ops = { .start = sun8i_emac_eth_start, .write_hwaddr = sun8i_eth_write_hwaddr, + .read_rom_hwaddr = sunxi_mac_read_rom_hwaddr, .send = sun8i_emac_eth_send, .recv = sun8i_emac_eth_recv, .free_pkt = sun8i_eth_free_pkt,