[U-Boot] [PATCH 4/4 V3] EXYNOS: Move files from board/samsung to arch/arm

This patch performs the following:

1) Convert the assembly code for memory and clock initialization to C code. 2) Move the memory and clock init codes from board/samsung to arch/arm 3) Creat a common lowlevel_init file across Exynos4 and Exynos5. Converted the common lowlevel_init from assembly to C-code 4) Made spl_boot.c and tzpc_init.c common for both exynos4 and exynos5. 5) Enable CONFIG_SKIP_LOWLEVEL_INIT as stack pointer initialisation is already done in _main. 6) exynos-uboot-spl.lds made common across SMDKV310, Origen and SMDK5250.

TEST: Tested SD-MMC boot on SMDK5250 and Origen. Tested USB and SPI boot on SMDK5250 Compile tested for SMDKV310.

Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com --- Changes in V2: - Rebased on latest u-boot-samsung tree. - Incorporated review comments from Minkyu Kang. Changes in V3: - Optimised the mem_ctrl_init function for exynos4. - Removed magic numbers. arch/arm/cpu/armv7/exynos/Makefile | 17 +- .../arm/cpu/armv7/exynos}/clock_init.h | 0 arch/arm/cpu/armv7/exynos/clock_init_exynos4.c | 94 +++++ .../arm/cpu/armv7/exynos/clock_init_exynos5.c | 47 +-- arch/arm/cpu/armv7/exynos/common_setup.h | 43 ++ .../arm/cpu/armv7/exynos}/dmc_common.c | 7 +- .../arm/cpu/armv7/exynos}/dmc_init_ddr3.c | 19 +- arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c | 212 ++++++++++ .../arm/cpu/armv7/exynos/exynos4_setup.h | 397 +++++++++---------- .../arm/cpu/armv7/exynos/exynos5_setup.h | 28 +- arch/arm/cpu/armv7/exynos/lowlevel_init.c | 73 ++++ .../arm/cpu/armv7/exynos}/spl_boot.c | 74 +++- arch/arm/include/asm/arch-exynos/cpu.h | 5 +- board/samsung/origen/Makefile | 11 +- board/samsung/origen/lowlevel_init.S | 357 ----------------- board/samsung/origen/mem_setup.S | 421 -------------------- board/samsung/origen/mmc_boot.c | 58 --- board/samsung/smdk5250/Makefile | 14 +- board/samsung/smdkv310/Makefile | 10 +- board/samsung/smdkv310/lowlevel_init.S | 414 ------------------- board/samsung/smdkv310/mem_setup.S | 365 ----------------- board/samsung/smdkv310/mmc_boot.c | 60 --- include/configs/exynos5250-dt.h | 8 +- include/configs/origen.h | 8 +- include/configs/smdkv310.h | 7 +- 25 files changed, 770 insertions(+), 1979 deletions(-) rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/clock_init.h (100%) create mode 100644 arch/arm/cpu/armv7/exynos/clock_init_exynos4.c rename board/samsung/smdk5250/clock_init.c => arch/arm/cpu/armv7/exynos/clock_init_exynos5.c (95%) create mode 100644 arch/arm/cpu/armv7/exynos/common_setup.h rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/dmc_common.c (97%) rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/dmc_init_ddr3.c (95%) create mode 100644 arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c rename board/samsung/origen/origen_setup.h => arch/arm/cpu/armv7/exynos/exynos4_setup.h (65%) rename board/samsung/smdk5250/setup.h => arch/arm/cpu/armv7/exynos/exynos5_setup.h (96%) create mode 100644 arch/arm/cpu/armv7/exynos/lowlevel_init.c rename {board/samsung/smdk5250 => arch/arm/cpu/armv7/exynos}/spl_boot.c (74%) delete mode 100644 board/samsung/origen/lowlevel_init.S delete mode 100644 board/samsung/origen/mem_setup.S delete mode 100644 board/samsung/origen/mmc_boot.c delete mode 100644 board/samsung/smdkv310/lowlevel_init.S delete mode 100644 board/samsung/smdkv310/mem_setup.S delete mode 100644 board/samsung/smdkv310/mmc_boot.c

diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index b2f9152..4661155 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,10 +22,19 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(SOC).o

-COBJS += clock.o power.o soc.o system.o pinmux.o tzpc.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +COBJS-y += clock.o power.o soc.o system.o pinmux.o tzpc.o + +ifdef CONFIG_SPL_BUILD +COBJS-$(CONFIG_EXYNOS5) += clock_init_exynos5.o +COBJS-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o +COBJS-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o +COBJS-y += spl_boot.o +COBJS-y += lowlevel_init.o +endif + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS))

all: $(obj).depend $(LIB)

diff --git a/board/samsung/smdk5250/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h similarity index 100% rename from board/samsung/smdk5250/clock_init.h rename to arch/arm/cpu/armv7/exynos/clock_init.h diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c new file mode 100644 index 0000000..bee0b5c --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c @@ -0,0 +1,94 @@ +/* + * Clock Initialization for board based on EXYNOS4210 + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde rajeshwari.s@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <version.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clk.h> +#include <asm/arch/clock.h> +#include "common_setup.h" +#include "exynos4_setup.h" + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +void system_clock_init(void) +{ + struct exynos4_clock *clk = (struct exynos4_clock *)EXYNOS4_CLOCK_BASE; + + writel(CLK_SRC_CPU_VAL, &clk->src_cpu); + + sdelay(0x10000); + + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + writel(CLK_SRC_DMC_VAL, &clk->src_dmc); + writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus); + writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus); + writel(CLK_SRC_FSYS_VAL, &clk->src_fsys); + writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0); + writel(CLK_SRC_CAM_VAL, &clk->src_cam); + writel(CLK_SRC_MFC_VAL, &clk->src_mfc); + writel(CLK_SRC_G3D_VAL, &clk->src_g3d); + writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0); + + sdelay(0x10000); + + writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); + writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0); + writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1); + writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus); + writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus); + writel(CLK_DIV_TOP_VAL, &clk->div_top); + writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1); + writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2); + writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3); + writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0); + writel(CLK_DIV_CAM_VAL, &clk->div_cam); + writel(CLK_DIV_MFC_VAL, &clk->div_mfc); + writel(CLK_DIV_G3D_VAL, &clk->div_g3d); + writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0); + + /* Set PLL locktime */ + writel(PLL_LOCKTIME, &clk->apll_lock); + writel(PLL_LOCKTIME, &clk->mpll_lock); + writel(PLL_LOCKTIME, &clk->epll_lock); + writel(PLL_LOCKTIME, &clk->vpll_lock); + + writel(APLL_CON1_VAL, &clk->apll_con1); + writel(APLL_CON0_VAL, &clk->apll_con0); + writel(MPLL_CON1_VAL, &clk->mpll_con1); + writel(MPLL_CON0_VAL, &clk->mpll_con0); + writel(EPLL_CON1_VAL, &clk->epll_con1); + writel(EPLL_CON0_VAL, &clk->epll_con0); + writel(VPLL_CON1_VAL, &clk->vpll_con1); + writel(VPLL_CON0_VAL, &clk->vpll_con0); + + sdelay(0x30000); +} diff --git a/board/samsung/smdk5250/clock_init.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c similarity index 95% rename from board/samsung/smdk5250/clock_init.c rename to arch/arm/cpu/armv7/exynos/clock_init_exynos5.c index b288e66..d1a0084 100644 --- a/board/samsung/smdk5250/clock_init.c +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -31,7 +31,8 @@ #include <asm/arch/dwmmc.h>

#include "clock_init.h" -#include "setup.h" +#include "common_setup.h" +#include "exynos5_setup.h"

#define FSYS1_MMC0_DIV_MASK 0xff0f #define FSYS1_MMC0_DIV_VAL 0x0701 @@ -214,10 +215,10 @@ struct mem_timings mem_timings[] = { DMC_MEMCONTROL_BL_8 | DMC_MEMCONTROL_PZQ_DISABLE | DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, + .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGX_CHIP_COL_10 | + DMC_MEMCONFIGX_CHIP_ROW_15 | + DMC_MEMCONFIGX_CHIP_BANK_8, .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), .prechconfig_tp_cnt = 0xff, @@ -317,10 +318,10 @@ struct mem_timings mem_timings[] = { DMC_MEMCONTROL_BL_8 | DMC_MEMCONTROL_PZQ_DISABLE | DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, + .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGX_CHIP_COL_10 | + DMC_MEMCONFIGX_CHIP_ROW_15 | + DMC_MEMCONFIGX_CHIP_BANK_8, .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), .prechconfig_tp_cnt = 0xff, @@ -350,9 +351,8 @@ struct mem_timings mem_timings[] = { * @param frequency_mhz Returns memory speed in MHz * @param arm_freq Returns ARM clock speed in MHz * @param mem_manuf Return Memory Manufacturer name - * @return 0 if all ok */ -static int clock_get_mem_selection(enum ddr_mode *mem_type, +static void clock_get_mem_selection(enum ddr_mode *mem_type, unsigned *frequency_mhz, unsigned *arm_freq, enum mem_manuf *mem_manuf) { @@ -363,8 +363,6 @@ static int clock_get_mem_selection(enum ddr_mode *mem_type, *frequency_mhz = params->frequency_mhz; *arm_freq = params->arm_freq_mhz; *mem_manuf = params->mem_manuf; - - return 0; }

/* Get the ratios for setting ARM clock */ @@ -376,9 +374,9 @@ struct arm_clk_ratios *get_arm_ratios(void) unsigned frequency_mhz, arm_freq; int i;

- if (clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) - ; + clock_get_mem_selection(&mem_type, &frequency_mhz, + &arm_freq, &mem_manuf); + for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); i++, arm_ratio++) { if (arm_ratio->arm_freq_mhz == arm_freq) @@ -400,15 +398,14 @@ struct mem_timings *clock_get_mem_timings(void) unsigned frequency_mhz, arm_freq; int i;

- if (!clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) { - for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); - i++, mem++) { - if (mem->mem_type == mem_type && - mem->frequency_mhz == frequency_mhz && - mem->mem_manuf == mem_manuf) - return mem; - } + clock_get_mem_selection(&mem_type, &frequency_mhz, + &arm_freq, &mem_manuf); + for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); + i++, mem++) { + if (mem->mem_type == mem_type && + mem->frequency_mhz == frequency_mhz && + mem->mem_manuf == mem_manuf) + return mem; }

/* will hang if failed to find memory timings */ diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h new file mode 100644 index 0000000..59ee192 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/common_setup.h @@ -0,0 +1,43 @@ +/* + * Common APIs for EXYNOS based board + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde rajeshwari.s@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Memory initialization + * + * @param reset Reset PHY during initialization. + */ +void mem_ctrl_init(int reset); + + /* System Clock initialization */ +void system_clock_init(void); + +/* + * Init subsystems according to the reset status + * + * @return 0 for a normal boot, non-zero for a resume + */ +int do_lowlevel_init(void); + +void sdelay(unsigned long); diff --git a/board/samsung/smdk5250/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c similarity index 97% rename from board/samsung/smdk5250/dmc_common.c rename to arch/arm/cpu/armv7/exynos/dmc_common.c index 109602a..645f57e 100644 --- a/board/samsung/smdk5250/dmc_common.c +++ b/arch/arm/cpu/armv7/exynos/dmc_common.c @@ -26,7 +26,8 @@ #include <asm/arch/spl.h>

#include "clock_init.h" -#include "setup.h" +#include "common_setup.h" +#include "exynos5_setup.h"

#define ZQ_INIT_TIMEOUT 10000

@@ -175,7 +176,7 @@ void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc) writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); }

-void mem_ctrl_init() +void mem_ctrl_init(int reset) { struct spl_machine_param *param = spl_get_machine_params(); struct mem_timings *mem; @@ -185,7 +186,7 @@ void mem_ctrl_init()

/* If there are any other memory variant, add their init call below */ if (param->mem_type == DDR_MODE_DDR3) { - ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size); + ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset); if (ret) { /* will hang if failed to init memory control */ while (1) diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c similarity index 95% rename from board/samsung/smdk5250/dmc_init_ddr3.c rename to arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c index e050790..de54af8 100644 --- a/board/samsung/smdk5250/dmc_init_ddr3.c +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -27,7 +27,8 @@ #include <asm/arch/clock.h> #include <asm/arch/cpu.h> #include <asm/arch/dmc.h> -#include "setup.h" +#include "common_setup.h" +#include "exynos5_setup.h" #include "clock_init.h"

#define RDLVL_COMPLETE_TIMEOUT 10000 @@ -40,7 +41,8 @@ static void reset_phy_ctrl(void) writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl); }

-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, + int reset) { unsigned int val; struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl; @@ -49,9 +51,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)

phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE; phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE; - dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE; + dmc = (struct exynos5_dmc *)samsung_get_base_dmc0();

- reset_phy_ctrl(); + if (reset) + reset_phy_ctrl();

/* Set Impedance Output Driver */ val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) | @@ -100,14 +103,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)

/* Start DLL locking */ writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), - &phy0_ctrl->phy_con12); + &phy0_ctrl->phy_con12); writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), - &phy1_ctrl->phy_con12); + &phy1_ctrl->phy_con12);

update_reset_dll(dmc, DDR_MODE_DDR3);

writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), - &dmc->concontrol); + &dmc->concontrol);

/* Memory Channel Inteleaving Size */ writel(mem->iv_size, &dmc->ivcontrol); @@ -119,7 +122,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)

/* Precharge Configuration */ writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, - &dmc->prechconfig); + &dmc->prechconfig);

/* Power Down mode Configuration */ writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c new file mode 100644 index 0000000..636d84c --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c @@ -0,0 +1,212 @@ +/* + * Memory setup for board based on EXYNOS4210 + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde rajeshwari.s@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/dmc.h> +#include "common_setup.h" +#include "exynos4_setup.h" + +struct mem_timings mem = { + .direct_cmd_msr = { + DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4 + }, + .timingref = TIMINGREF_VAL, + .timingrow = TIMINGROW_VAL, + .timingdata = TIMINGDATA_VAL, + .timingpower = TIMINGPOWER_VAL, + .zqcontrol = ZQ_CONTROL_VAL, + .control0 = CONTROL0_VAL, + .control1 = CONTROL1_VAL, + .control2 = CONTROL2_VAL, + .concontrol = CONCONTROL_VAL, + .prechconfig = PRECHCONFIG, + .memcontrol = MEMCONTROL_VAL, + .memconfig0 = MEMCONFIG0_VAL, + .memconfig1 = MEMCONFIG1_VAL, + .dll_resync = FORCE_DLL_RESYNC, + .dll_on = DLL_CONTROL_ON, +}; +static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc) +{ + if (ctrl_no) { + writel((mem.control1 | (1 << mem.dll_resync)), + &dmc->phycontrol1); + writel((mem.control1 | (0 << mem.dll_resync)), + &dmc->phycontrol1); + } else { + writel((mem.control0 | (0 << mem.dll_on)), + &dmc->phycontrol0); + writel((mem.control0 | (1 << mem.dll_on)), + &dmc->phycontrol0); + } +} + +static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip) +{ + int i; + unsigned long mask = 0; + + if (chip) + mask = DIRECT_CMD_CHIP1_SHIFT; + + for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { + writel(mem.direct_cmd_msr[i] | mask, + &dmc->directcmd); + } +} + +static void dmc_init(struct exynos4_dmc *dmc) +{ + /* + * DLL Parameter Setting: + * Termination: Enable R/W + * Phase Delay for DQS Cleaning: 180' Shift + */ + writel(mem.control1, &dmc->phycontrol1); + + /* + * ZQ Calibration + * Termination: Disable + * Auto Calibration Start: Enable + */ + writel(mem.zqcontrol, &dmc->phyzqcontrol); + sdelay(0x100000); + + /* + * Update DLL Information: + * Force DLL Resyncronization + */ + phy_control_reset(1, dmc); + phy_control_reset(0, dmc); + + /* Set DLL Parameters */ + writel(mem.control1, &dmc->phycontrol1); + + /* DLL Start */ + writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0); + + writel(mem.control2, &dmc->phycontrol2); + + /* Set Clock Ratio of Bus clock to Memory Clock */ + writel(mem.concontrol, &dmc->concontrol); + + /* + * Memor Burst length: 8 + * Number of chips: 2 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 1 Cycle + */ + writel(mem.memcontrol, &dmc->memcontrol); + + writel(mem.memconfig0, &dmc->memconfig0); + writel(mem.memconfig1, &dmc->memconfig1); + + /* Config Precharge Policy */ + writel(mem.prechconfig, &dmc->prechconfig); + /* + * TimingAref, TimingRow, TimingData, TimingPower Setting: + * Values as per Memory AC Parameters + */ + writel(mem.timingref, &dmc->timingref); + writel(mem.timingrow, &dmc->timingrow); + writel(mem.timingdata, &dmc->timingdata); + writel(mem.timingpower, &dmc->timingpower); + + /* Chip0: NOP Command: Assert and Hold CKE to high level */ + writel(DIRECT_CMD_NOP, &dmc->directcmd); + sdelay(0x100000); + + /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + dmc_config_mrs(dmc, 0); + sdelay(0x100000); + + /* Chip0: ZQINIT */ + writel(DIRECT_CMD_ZQ, &dmc->directcmd); + sdelay(0x100000); + + writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd); + sdelay(0x100000); + + /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + dmc_config_mrs(dmc, 1); + sdelay(0x100000); + + /* Chip1: ZQINIT */ + writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd); + sdelay(0x100000); + + phy_control_reset(1, dmc); + sdelay(0x100000); + + /* turn on DREX0, DREX1 */ + writel((mem.concontrol | AREF_EN), &dmc->concontrol); +} + +void mem_ctrl_init(int reset) +{ + struct exynos4_dmc *dmc; + + /* + * Async bridge configuration at CPU_core: + * 1: half_sync + * 0: full_sync + */ + writel(1, ASYNC_CONFIG); +#ifdef CONFIG_ORIGEN + /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ + writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE + + APB_SFR_INTERLEAVE_CONF_OFFSET); + /* Update MIU Configuration */ + writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE + + APB_SFR_ARBRITATION_CONF_OFFSET); +#else + writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE + + APB_SFR_INTERLEAVE_CONF_OFFSET); + writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET); + writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET); + writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE + + ABP_SFR_SLV_ADDRMAP_CONF_OFFSET); +#ifdef CONFIG_MIU_LINEAR + writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET); + writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET); + writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET); + writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET); + writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE + + ABP_SFR_SLV_ADDRMAP_CONF_OFFSET); +#endif +#endif + /* DREX0 */ + dmc = (struct exynos4_dmc *)samsung_get_base_dmc0(); + dmc_init(dmc); + dmc = (struct exynos4_dmc *)samsung_get_base_dmc1(); + dmc_init(dmc); +} diff --git a/board/samsung/origen/origen_setup.h b/arch/arm/cpu/armv7/exynos/exynos4_setup.h similarity index 65% rename from board/samsung/origen/origen_setup.h rename to arch/arm/cpu/armv7/exynos/exynos4_setup.h index 926a4cc..6d25058 100644 --- a/board/samsung/origen/origen_setup.h +++ b/arch/arm/cpu/armv7/exynos/exynos4_setup.h @@ -1,5 +1,5 @@ /* - * Machine Specific Values for ORIGEN board based on S5PV310 + * Machine Specific Values for EXYNOS4012 based board * * Copyright (C) 2011 Samsung Electronics * @@ -29,98 +29,22 @@ #include <version.h> #include <asm/arch/cpu.h>

-/* Offsets of clock registers (sources and dividers) */ -#define CLK_SRC_CPU_OFFSET 0x14200 -#define CLK_DIV_CPU0_OFFSET 0x14500 -#define CLK_DIV_CPU1_OFFSET 0x14504 - -#define CLK_SRC_DMC_OFFSET 0x10200 -#define CLK_DIV_DMC0_OFFSET 0x10500 -#define CLK_DIV_DMC1_OFFSET 0x10504 - -#define CLK_SRC_TOP0_OFFSET 0xC210 -#define CLK_SRC_TOP1_OFFSET 0xC214 -#define CLK_DIV_TOP_OFFSET 0xC510 - -#define CLK_SRC_LEFTBUS_OFFSET 0x4200 -#define CLK_DIV_LEFTBUS_OFFSET 0x4500 - -#define CLK_SRC_RIGHTBUS_OFFSET 0x8200 -#define CLK_DIV_RIGHTBUS_OFFSET 0x8500 - -#define CLK_SRC_FSYS_OFFSET 0xC240 -#define CLK_DIV_FSYS1_OFFSET 0xC544 -#define CLK_DIV_FSYS2_OFFSET 0xC548 -#define CLK_DIV_FSYS3_OFFSET 0xC54C - -#define CLK_SRC_CAM_OFFSET 0xC220 -#define CLK_SRC_TV_OFFSET 0xC224 -#define CLK_SRC_MFC_OFFSET 0xC228 -#define CLK_SRC_G3D_OFFSET 0xC22C -#define CLK_SRC_LCD0_OFFSET 0xC234 -#define CLK_SRC_PERIL0_OFFSET 0xC250 - -#define CLK_DIV_CAM_OFFSET 0xC520 -#define CLK_DIV_TV_OFFSET 0xC524 -#define CLK_DIV_MFC_OFFSET 0xC528 -#define CLK_DIV_G3D_OFFSET 0xC52C -#define CLK_DIV_LCD0_OFFSET 0xC534 -#define CLK_DIV_PERIL0_OFFSET 0xC550 - -#define CLK_SRC_LCD0_OFFSET 0xC234 - -#define APLL_LOCK_OFFSET 0x14000 -#define MPLL_LOCK_OFFSET 0x14008 -#define APLL_CON0_OFFSET 0x14100 -#define APLL_CON1_OFFSET 0x14104 -#define MPLL_CON0_OFFSET 0x14108 -#define MPLL_CON1_OFFSET 0x1410C - -#define EPLL_LOCK_OFFSET 0xC010 -#define VPLL_LOCK_OFFSET 0xC020 -#define EPLL_CON0_OFFSET 0xC110 -#define EPLL_CON1_OFFSET 0xC114 -#define VPLL_CON0_OFFSET 0xC120 -#define VPLL_CON1_OFFSET 0xC124 - -/* DMC: DRAM Controllor Register offsets */ -#define DMC_CONCONTROL 0x00 -#define DMC_MEMCONTROL 0x04 -#define DMC_MEMCONFIG0 0x08 -#define DMC_MEMCONFIG1 0x0C -#define DMC_DIRECTCMD 0x10 -#define DMC_PRECHCONFIG 0x14 -#define DMC_PHYCONTROL0 0x18 -#define DMC_PHYCONTROL1 0x1C -#define DMC_PHYCONTROL2 0x20 -#define DMC_TIMINGAREF 0x30 -#define DMC_TIMINGROW 0x34 -#define DMC_TIMINGDATA 0x38 -#define DMC_TIMINGPOWER 0x3C -#define DMC_PHYZQCONTROL 0x44 +#ifdef CONFIG_CLK_800_330_165 +#define DRAM_CLK_330 +#endif +#ifdef CONFIG_CLK_1000_200_200 +#define DRAM_CLK_200 +#endif +#ifdef CONFIG_CLK_1000_330_165 +#define DRAM_CLK_330 +#endif +#ifdef CONFIG_CLK_1000_400_200 +#define DRAM_CLK_400 +#endif

/* Bus Configuration Register Address */ #define ASYNC_CONFIG 0x10010350

-/* MIU Config Register Offsets*/ -#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 -#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 - -/* Offset for inform registers */ -#define INFORM0_OFFSET 0x800 -#define INFORM1_OFFSET 0x804 - -/* GPIO Offsets for UART: GPIO Contol Register */ -#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00 -#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20 - -/* UART Register offsets */ -#define ULCON_OFFSET 0x00 -#define UCON_OFFSET 0x04 -#define UFCON_OFFSET 0x08 -#define UBRDIV_OFFSET 0x28 -#define UFRACVAL_OFFSET 0x2C - /* CLK_SRC_CPU */ #define MUX_HPM_SEL_MOUTAPLL 0x0 #define MUX_HPM_SEL_SCLKMPLL 0x1 @@ -485,123 +409,186 @@ | (VPLL_MRR << 24) \ | (VPLL_MFR << 16) \ | (VPLL_K << 0)) -/* - * UART GPIO_A0/GPIO_A1 Control Register Value - * 0x2: UART Function - */ -#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222 -#define EXYNOS4_GPIO_A1_CON_VAL 0x222222 - -/* ULCON: UART Line Control Value 8N1 */ -#define WORD_LEN_5_BIT 0x00 -#define WORD_LEN_6_BIT 0x01 -#define WORD_LEN_7_BIT 0x02 -#define WORD_LEN_8_BIT 0x03 - -#define STOP_BIT_1 0x00 -#define STOP_BIT_2 0x01 - -#define NO_PARITY 0x00 -#define ODD_PARITY 0x4 -#define EVEN_PARITY 0x5 -#define FORCED_PARITY_CHECK_AS_1 0x6 -#define FORCED_PARITY_CHECK_AS_0 0x7 - -#define INFRAMODE_NORMAL 0x00 -#define INFRAMODE_INFRARED 0x01 - -#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \ - | (NO_PARITY << 3) \ - | (STOP_BIT_1 << 2) \ - | (WORD_LEN_8_BIT << 0))

-/* - * UCON: UART Control Value - * Tx_interrupt Type: Level - * Rx_interrupt Type: Level - * Rx Timeout Enabled: Yes - * Rx-Error Atatus_Int Enable: Yes - * Loop_Back: No - * Break Signal: No - * Transmit mode : Interrupt request/polling - * Receive mode : Interrupt request/polling - */ -#define TX_PULSE_INTERRUPT 0 -#define TX_LEVEL_INTERRUPT 1 -#define RX_PULSE_INTERRUPT 0 -#define RX_LEVEL_INTERRUPT 1 - -#define RX_TIME_OUT ENABLE -#define RX_ERROR_STATE_INT_ENB ENABLE -#define LOOP_BACK DISABLE -#define BREAK_SIGNAL DISABLE - -#define TX_MODE_DISABLED 0X00 -#define TX_MODE_IRQ_OR_POLL 0X01 -#define TX_MODE_DMA 0X02 - -#define RX_MODE_DISABLED 0X00 -#define RX_MODE_IRQ_OR_POLL 0X01 -#define RX_MODE_DMA 0X02 - -#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \ - | (RX_LEVEL_INTERRUPT << 8) \ - | (RX_TIME_OUT << 7) \ - | (RX_ERROR_STATE_INT_ENB << 6) \ - | (LOOP_BACK << 5) \ - | (BREAK_SIGNAL << 4) \ - | (TX_MODE_IRQ_OR_POLL << 2) \ - | (RX_MODE_IRQ_OR_POLL << 0)) +/* DMC */ +#define DIRECT_CMD_NOP 0x07000000 +#define DIRECT_CMD_ZQ 0x0a000000 +#define DIRECT_CMD_CHIP1_SHIFT (1 << 20) +#define MEM_TIMINGS_MSR_COUNT 4 +#define CTRL_START (1 << 0) +#define CTRL_DLL_ON (1 << 1) +#define AREF_EN (1 << 5) +#define DRV_TYPE (1 << 6) + +struct mem_timings { + unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + unsigned timingref; + unsigned timingrow; + unsigned timingdata; + unsigned timingpower; + unsigned zqcontrol; + unsigned control0; + unsigned control1; + unsigned control2; + unsigned concontrol; + unsigned prechconfig; + unsigned memcontrol; + unsigned memconfig0; + unsigned memconfig1; + unsigned dll_resync; + unsigned dll_on; +}; + +/* MIU */ +/* MIU Config Register Offsets*/ +#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 +#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 +#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800 +#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808 +#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810 +#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818 +#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820 +#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828 +#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830 + +#ifdef CONFIG_ORIGEN +/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ +#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507 +#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001 +#endif

-/* - * UFCON: UART FIFO Control Value - * Tx FIFO Trigger LEVEL: 2 Bytes (001) - * Rx FIFO Trigger LEVEL: 2 Bytes (001) - * Tx Fifo Reset: No - * Rx Fifo Reset: No - * FIFO Enable: Yes - */ -#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00 -#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1 -#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2 -#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3 -#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4 -#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5 -#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6 -#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7 - -#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0 -#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1 -#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2 -#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3 -#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4 -#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5 -#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6 -#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7 - -#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES -#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES -#define TX_FIFO_RESET DISABLE -#define RX_FIFO_RESET DISABLE -#define FIFO_ENABLE ENABLE -#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \ - | (RX_FIFO_TRIGGER_LEVEL << 4) \ - | (TX_FIFO_RESET << 2) \ - | (RX_FIFO_RESET << 1) \ - | (FIFO_ENABLE << 0)) -/* - * Baud Rate Division Value - * 115200 BAUD: - * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1) - * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1) - */ -#define UBRDIV_VAL 0x35 +#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000 +#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff +#define INTERLEAVE_ADDR_MAP_EN 0x00000001

-/* - * Fractional Part of Baud Rate Divisor: - * 115200 BAUD: - * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10) - * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10) - */ -#define UFRACVAL_VAL 0x4 +#ifdef CONFIG_MIU_1BIT_INTERLEAVED +/* Interleave_bit0: 0xC*/ +#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c +#endif +#ifdef CONFIG_MIU_2BIT_INTERLEAVED +/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */ +#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c +#endif +#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000 +#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff +#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000 +#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff +/* Enable SME0 and SME1*/ +#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006 + +#define FORCE_DLL_RESYNC 3 +#define DLL_CONTROL_ON 1 + +#define DIRECT_CMD1 0x00020000 +#define DIRECT_CMD2 0x00030000 +#define DIRECT_CMD3 0x00010002 +#define DIRECT_CMD4 0x00000328 + +#define CTRL_ZQ_MODE_NOTERM (0x1 << 0) +#define CTRL_ZQ_START (0x1 << 1) +#define CTRL_ZQ_DIV (0 << 4) +#define CTRL_ZQ_MODE_DDS (0x7 << 8) +#define CTRL_ZQ_MODE_TERM (0x2 << 11) +#define CTRL_ZQ_FORCE_IMPN (0x5 << 14) +#define CTRL_ZQ_FORCE_IMPP (0x6 << 17) +#define CTRL_DCC (0xE38 << 20) +#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\ + | CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\ + | CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\ + | CTRL_ZQ_FORCE_IMPP | CTRL_DCC) + +#define ASYNC (0 << 0) +#define CLK_RATIO (1 << 1) +#define DIV_PIPE (1 << 3) +#define AWR_ON (1 << 4) +#define AREF_DISABLE (0 << 5) +#define DRV_TYPE_DISABLE (0 << 6) +#define CHIP0_NOT_EMPTY (0 << 8) +#define CHIP1_NOT_EMPTY (0 << 9) +#define DQ_SWAP_DISABLE (0 << 10) +#define QOS_FAST_DISABLE (0 << 11) +#define RD_FETCH (0x3 << 12) +#define TIMEOUT_LEVEL0 (0xFFF << 16) +#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\ + | AREF_DISABLE | DRV_TYPE_DISABLE\ + | CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\ + | DQ_SWAP_DISABLE | QOS_FAST_DISABLE\ + | RD_FETCH | TIMEOUT_LEVEL0) + +#define CLK_STOP_DISABLE (0 << 1) +#define DPWRDN_DISABLE (0 << 2) +#define DPWRDN_TYPE (0 << 3) +#define TP_DISABLE (0 << 4) +#define DSREF_DIABLE (0 << 5) +#define ADD_LAT_PALL (1 << 6) +#define MEM_TYPE_DDR3 (0x6 << 8) +#define MEM_WIDTH_32 (0x2 << 12) +#define NUM_CHIP_2 (1 << 16) +#define BL_8 (0x3 << 20) +#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\ + | DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\ + | ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\ + | NUM_CHIP_2 | BL_8) + + +#define CHIP_BANK_8 (0x3 << 0) +#define CHIP_ROW_14 (0x2 << 4) +#define CHIP_COL_10 (0x3 << 8) +#define CHIP_MAP_INTERLEAVED (1 << 12) +#define CHIP_MASK (0xe0 << 16) +#ifdef CONFIG_MIU_LINEAR +#define CHIP0_BASE (0x40 << 24) +#define CHIP1_BASE (0x60 << 24) +#else +#define CHIP0_BASE (0x20 << 24) +#define CHIP1_BASE (0x40 << 24) +#endif +#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\ + | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE) +#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\ + | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE) + +#define TP_CNT (0xff << 24) +#define PRECHCONFIG TP_CNT + +#define CTRL_OFF (0 << 0) +#define CTRL_DLL_OFF (0 << 1) +#define CTRL_HALF (0 << 2) +#define CTRL_DFDQS (1 << 3) +#define DQS_DELAY (0 << 4) +#define CTRL_START_POINT (0x10 << 8) +#define CTRL_INC (0x10 << 16) +#define CTRL_FORCE (0x71 << 24) +#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\ + | CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\ + | CTRL_INC | CTRL_FORCE) + +#define CTRL_SHIFTC (0x6 << 0) +#define CTRL_REF (8 << 4) +#define CTRL_SHGATE (1 << 29) +#define TERM_READ_EN (1 << 30) +#define TERM_WRITE_EN (1 << 31) +#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\ + | TERM_READ_EN | TERM_WRITE_EN) + +#define CONTROL2_VAL 0x00000000 + +#ifdef CONFIG_ORIGEN +#define TIMINGREF_VAL 0x000000BB +#define TIMINGROW_VAL 0x4046654f +#define TIMINGDATA_VAL 0x46400506 +#define TIMINGPOWER_VAL 0x52000A3C +#else +#define TIMINGREF_VAL 0x000000BC +#ifdef DRAM_CLK_330 +#define TIMINGROW_VAL 0x3545548d +#define TIMINGDATA_VAL 0x45430506 +#define TIMINGPOWER_VAL 0x4439033c +#endif +#ifdef DRAM_CLK_400 +#define TIMINGROW_VAL 0x45430506 +#define TIMINGDATA_VAL 0x56500506 +#define TIMINGPOWER_VAL 0x5444033d +#endif +#endif #endif diff --git a/board/samsung/smdk5250/setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h similarity index 96% rename from board/samsung/smdk5250/setup.h rename to arch/arm/cpu/armv7/exynos/exynos5_setup.h index eb91d13..8f36c16 100644 --- a/board/samsung/smdk5250/setup.h +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h @@ -93,17 +93,17 @@ #define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25)

/* MEMCONFIG0 register bit fields */ -#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12) -#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8) -#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4) -#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4) -#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0) - -#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16) -#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0) +#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12) +#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8) +#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4) +#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4) +#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0) + +#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16) +#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0) #define DMC_MEMBASECONFIG_VAL(x) ( \ - DMC_MEMBASECONFIGx_CHIP_BASE(x) | \ - DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \ + DMC_MEMBASECONFIGX_CHIP_BASE(x) | \ + DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \ )

#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40) @@ -513,9 +513,11 @@ enum { * which the DMC uses to decide how to split a memory * chunk into smaller chunks to support concurrent * accesses; may vary across boards. + * @param reset Reset DDR PHY during initialization. * @return 0 if ok, SETUP_ERR_... if there is a problem */ -int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size); +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, + int reset);

/* * Configure ZQ I/O interface @@ -562,8 +564,4 @@ void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc); * @param ddr_mode Type of DDR memory */ void update_reset_dll(struct exynos5_dmc *, enum ddr_mode); - -void sdelay(unsigned long); -void mem_ctrl_init(void); -void system_clock_init(void); #endif diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c new file mode 100644 index 0000000..11fe5b8 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c @@ -0,0 +1,73 @@ +/* + * Lowlevel setup for EXYNOS5 based board + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde rajeshwari.s@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dmc.h> +#include <asm/arch/power.h> +#include <asm/arch/tzpc.h> +#include <asm/arch/periph.h> +#include <asm/arch/pinmux.h> +#include "common_setup.h" + +/* These are the things we can do during low-level init */ +enum { + DO_WAKEUP = 1 << 0, + DO_CLOCKS = 1 << 1, + DO_MEM_RESET = 1 << 2, + DO_UART = 1 << 3, +}; + +int do_lowlevel_init(void) +{ + uint32_t reset_status; + int actions = 0; + + arch_cpu_init(); + + reset_status = get_reset_status(); + + switch (reset_status) { + case S5P_CHECK_SLEEP: + actions = DO_CLOCKS | DO_WAKEUP; + break; + case S5P_CHECK_DIDLE: + case S5P_CHECK_LPA: + actions = DO_WAKEUP; + break; + default: + /* This is a normal boot (not a wake from sleep) */ + actions = DO_CLOCKS | DO_MEM_RESET; + } + + if (actions & DO_CLOCKS) { + system_clock_init(); + mem_ctrl_init(actions & DO_MEM_RESET); + tzpc_init(); + } + + return actions & DO_WAKEUP; +} diff --git a/board/samsung/smdk5250/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c similarity index 74% rename from board/samsung/smdk5250/spl_boot.c rename to arch/arm/cpu/armv7/exynos/spl_boot.c index 83275f1..6e8dd3b 100644 --- a/board/samsung/smdk5250/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -23,13 +23,18 @@ #include<common.h> #include<config.h>

-#include <asm/arch-exynos/dmc.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> +#include <asm/arch/dmc.h> +#include <asm/arch/power.h> #include <asm/arch/spl.h>

+#include "common_setup.h" #include "clock_init.h"

+DECLARE_GLOBAL_DATA_PTR; +#define OM_STAT (0x1f << 1) + /* Index into irom ptr table */ enum index { MMC_INDEX, @@ -54,6 +59,7 @@ void *get_irom_func(int index) return (void *)*(u32 *)irom_ptr_table[index]; }

+#ifdef CONFIG_USB_BOOTING /* * Set/clear program flow prediction and return the previous state. */ @@ -67,6 +73,7 @@ static int config_branch_prediction(int set_cr_z)

return cr & CR_Z; } +#endif

/* * Copy U-boot from mmc to RAM: @@ -75,35 +82,42 @@ static int config_branch_prediction(int set_cr_z) */ void copy_uboot_to_ram(void) { - int is_cr_z_set; - unsigned int sec_boot_check; enum boot_mode bootmode = BOOT_MODE_OM;

- u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst); - u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst); + u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL; + u32 offset = 0, size = 0; +#ifdef CONFIG_SUPPORT_EMMC_BOOT u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst); void (*end_bootop_from_emmc)(void); +#endif +#ifdef CONFIG_USB_BOOTING u32 (*usb_copy)(void); + int is_cr_z_set; + unsigned int sec_boot_check;

/* Read iRAM location to check for secondary USB boot mode */ sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE); if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT) bootmode = BOOT_MODE_USB; +#endif

if (bootmode == BOOT_MODE_OM) - bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT; + bootmode = readl(samsung_get_base_power()) & OM_STAT;

switch (bootmode) { +#ifdef CONFIG_SPI_BOOTING case BOOT_MODE_SERIAL: - spi_copy = get_irom_func(SPI_INDEX); - spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE, - CONFIG_SYS_TEXT_BASE); + offset = SPI_FLASH_UBOOT_POS; + size = CONFIG_BL2_SIZE; + copy_bl2 = get_irom_func(SPI_INDEX); break; +#endif case BOOT_MODE_MMC: + offset = BL2_START_OFFSET; + size = BL2_SIZE_BLOC_COUNT; copy_bl2 = get_irom_func(MMC_INDEX); - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, - CONFIG_SYS_TEXT_BASE); break; +#ifdef CONFIG_SUPPORT_EMMC_BOOT case BOOT_MODE_EMMC: /* Set the FSYS1 clock divisor value for EMMC boot */ emmc_boot_clk_div_set(); @@ -114,6 +128,8 @@ void copy_uboot_to_ram(void) copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); end_bootop_from_emmc(); break; +#endif +#ifdef CONFIG_USB_BOOTING case BOOT_MODE_USB: /* * iROM needs program flow prediction to be disabled @@ -124,14 +140,50 @@ void copy_uboot_to_ram(void) usb_copy(); config_branch_prediction(is_cr_z_set); break; +#endif default: break; } + + if (copy_bl2) + copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE); +} + +void memzero(void *s, size_t n) +{ + char *ptr = s; + size_t i; + + for (i = 0; i < n; i++) + *ptr++ = '\0'; +} + +/** + * Set up the U-Boot global_data pointer + * + * This sets the address of the global data, and sets up basic values. + * + * @param gdp Value to give to gd + */ +static void setup_global_data(gd_t *gdp) +{ + gd = gdp; + memzero((void *)gd, sizeof(gd_t)); + gd->flags |= GD_FLG_RELOC; + gd->baudrate = CONFIG_BAUDRATE; + gd->have_console = 1; }

void board_init_f(unsigned long bootflag) { + __aligned(8) gd_t local_gd; __attribute__((noreturn)) void (*uboot)(void); + + setup_global_data(&local_gd); + + if (do_lowlevel_init()) + power_exit_wakeup(); + copy_uboot_to_ram();

/* Jump to U-Boot image */ diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 36b98c8..75dbe26 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -115,7 +115,7 @@ #define EXYNOS5_DMC_PHY0_BASE 0x10C00000 #define EXYNOS5_DMC_PHY1_BASE 0x10C10000 #define EXYNOS5_GPIO_PART3_BASE 0x10D10000 -#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000 +#define EXYNOS5_DMC0_BASE 0x10DD0000 #define EXYNOS5_GPIO_PART1_BASE 0x11400000 #define EXYNOS5_MIPI_DSIM_BASE 0x11D00000 #define EXYNOS5_USB_HOST_EHCI_BASE 0x12110000 @@ -135,6 +135,7 @@

#define EXYNOS5_ADC_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5_MODEM_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS5_DMC1_BASE DEVICE_NOT_AVAILABLE

#ifndef __ASSEMBLY__ #include <asm/io.h> @@ -237,6 +238,8 @@ SAMSUNG_BASE(power, POWER_BASE) SAMSUNG_BASE(spi, SPI_BASE) SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) SAMSUNG_BASE(tzpc, TZPC_BASE) +SAMSUNG_BASE(dmc0, DMC0_BASE) +SAMSUNG_BASE(dmc1, DMC1_BASE) #endif

#endif /* _EXYNOS4_CPU_H */ diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index 3a885a5..63c8b46 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -24,19 +24,12 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(BOARD).o

-SOBJS := mem_setup.o -SOBJS += lowlevel_init.o - ifndef CONFIG_SPL_BUILD COBJS += origen.o endif

-ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS))

ALL +=$(obj).depend $(LIB)

diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S deleted file mode 100644 index be9d418..0000000 --- a/board/samsung/origen/lowlevel_init.S +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Lowlevel setup for ORIGEN board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> -#include "origen_setup.h" -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - push {lr} - - /* r5 has always zero */ - mov r5, #0 - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* check reset status */ - ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in ram, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_asm_init - -1: - /* for UART */ - bl uart_asm_init - bl arch_cpu_init - bl tzpc_init - pop {pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_asm_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos4210_cpu_resume function */ - ldr r1, [r0] - - /* Jump to kernel*/ - mov pc, r1 - nop - nop - -/* - * system_clock_init: Initialize core clock and bus clock. - * void system_clock_init(void) - */ -system_clock_init: - push {lr} - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =CLK_SRC_CPU_VAL - ldr r2, =CLK_SRC_CPU_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -2: subs r1, r1, #1 - bne 2b - - ldr r1, =CLK_SRC_TOP0_VAL - ldr r2, =CLK_SRC_TOP0_OFFSET - str r1, [r0, r2] - - ldr r1, =CLK_SRC_TOP1_VAL - ldr r2, =CLK_SRC_TOP1_OFFSET - str r1, [r0, r2] - - /* DMC */ - ldr r1, =CLK_SRC_DMC_VAL - ldr r2, =CLK_SRC_DMC_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_LEFTBUS */ - ldr r1, =CLK_SRC_LEFTBUS_VAL - ldr r2, =CLK_SRC_LEFTBUS_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_RIGHTBUS */ - ldr r1, =CLK_SRC_RIGHTBUS_VAL - ldr r2, =CLK_SRC_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =CLK_SRC_FSYS_VAL - ldr r2, =CLK_SRC_FSYS_OFFSET - str r1, [r0, r2] - - /* UART[0:4] */ - ldr r1, =CLK_SRC_PERIL0_VAL - ldr r2, =CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* CAM , FIMC 0-3 */ - ldr r1, =CLK_SRC_CAM_VAL - ldr r2, =CLK_SRC_CAM_OFFSET - str r1, [r0, r2] - - /* MFC */ - ldr r1, =CLK_SRC_MFC_VAL - ldr r2, =CLK_SRC_MFC_OFFSET - str r1, [r0, r2] - - /* G3D */ - ldr r1, =CLK_SRC_G3D_VAL - ldr r2, =CLK_SRC_G3D_OFFSET - str r1, [r0, r2] - - /* LCD0 */ - ldr r1, =CLK_SRC_LCD0_VAL - ldr r2, =CLK_SRC_LCD0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -3: subs r1, r1, #1 - bne 3b - - /* CLK_DIV_CPU0 */ - ldr r1, =CLK_DIV_CPU0_VAL - ldr r2, =CLK_DIV_CPU0_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_CPU1 */ - ldr r1, =CLK_DIV_CPU1_VAL - ldr r2, =CLK_DIV_CPU1_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_DMC0 */ - ldr r1, =CLK_DIV_DMC0_VAL - ldr r2, =CLK_DIV_DMC0_OFFSET - str r1, [r0, r2] - - /*CLK_DIV_DMC1 */ - ldr r1, =CLK_DIV_DMC1_VAL - ldr r2, =CLK_DIV_DMC1_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_LEFTBUS */ - ldr r1, =CLK_DIV_LEFTBUS_VAL - ldr r2, =CLK_DIV_LEFTBUS_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_RIGHTBUS */ - ldr r1, =CLK_DIV_RIGHTBUS_VAL - ldr r2, =CLK_DIV_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_TOP */ - ldr r1, =CLK_DIV_TOP_VAL - ldr r2, =CLK_DIV_TOP_OFFSET - str r1, [r0, r2] - - /* MMC[0:1] */ - ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS1_OFFSET - str r1, [r0, r2] - - /* MMC[2:3] */ - ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS2_OFFSET - str r1, [r0, r2] - - /* MMC4 */ - ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS3_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_PERIL0: UART Clock Divisors */ - ldr r1, =CLK_DIV_PERIL0_VAL - ldr r2, =CLK_DIV_PERIL0_OFFSET - str r1, [r0, r2] - - /* CAM, FIMC 0-3: CAM Clock Divisors */ - ldr r1, =CLK_DIV_CAM_VAL - ldr r2, =CLK_DIV_CAM_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_MFC: MFC Clock Divisors */ - ldr r1, =CLK_DIV_MFC_VAL - ldr r2, =CLK_DIV_MFC_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_G3D: G3D Clock Divisors */ - ldr r1, =CLK_DIV_G3D_VAL - ldr r2, =CLK_DIV_G3D_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_LCD0: LCD0 Clock Divisors */ - ldr r1, =CLK_DIV_LCD0_VAL - ldr r2, =CLK_DIV_LCD0_OFFSET - str r1, [r0, r2] - - /* Set PLL locktime */ - ldr r1, =PLL_LOCKTIME - ldr r2, =APLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =MPLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =EPLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =VPLL_LOCK_OFFSET - str r1, [r0, r2] - - /* APLL_CON1 */ - ldr r1, =APLL_CON1_VAL - ldr r2, =APLL_CON1_OFFSET - str r1, [r0, r2] - - /* APLL_CON0 */ - ldr r1, =APLL_CON0_VAL - ldr r2, =APLL_CON0_OFFSET - str r1, [r0, r2] - - /* MPLL_CON1 */ - ldr r1, =MPLL_CON1_VAL - ldr r2, =MPLL_CON1_OFFSET - str r1, [r0, r2] - - /* MPLL_CON0 */ - ldr r1, =MPLL_CON0_VAL - ldr r2, =MPLL_CON0_OFFSET - str r1, [r0, r2] - - /* EPLL */ - ldr r1, =EPLL_CON1_VAL - ldr r2, =EPLL_CON1_OFFSET - str r1, [r0, r2] - - /* EPLL_CON0 */ - ldr r1, =EPLL_CON0_VAL - ldr r2, =EPLL_CON0_OFFSET - str r1, [r0, r2] - - /* VPLL_CON1 */ - ldr r1, =VPLL_CON1_VAL - ldr r2, =VPLL_CON1_OFFSET - str r1, [r0, r2] - - /* VPLL_CON0 */ - ldr r1, =VPLL_CON0_VAL - ldr r2, =VPLL_CON0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x30000 -4: subs r1, r1, #1 - bne 4b - - pop {pc} -/* - * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. - * void uart_asm_init(void) - */ - .globl uart_asm_init -uart_asm_init: - - /* setup UART0-UART3 GPIOs (part1) */ - mov r0, r7 - ldr r1, =EXYNOS4_GPIO_A0_CON_VAL - str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET] - ldr r1, =EXYNOS4_GPIO_A1_CON_VAL - str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET] - - ldr r0, =EXYNOS4_UART_BASE - add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET - - ldr r1, =ULCON_VAL - str r1, [r0, #ULCON_OFFSET] - ldr r1, =UCON_VAL - str r1, [r0, #UCON_OFFSET] - ldr r1, =UFCON_VAL - str r1, [r0, #UFCON_OFFSET] - ldr r1, =UBRDIV_VAL - str r1, [r0, #UBRDIV_OFFSET] - ldr r1, =UFRACVAL_VAL - str r1, [r0, #UFRACVAL_OFFSET] - mov pc, lr - nop - nop - nop - diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S deleted file mode 100644 index b49b193..0000000 --- a/board/samsung/origen/mem_setup.S +++ /dev/null @@ -1,421 +0,0 @@ -/* - * Memory setup for ORIGEN board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include "origen_setup.h" -#define SET_MIU - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - /* - * Async bridge configuration at CPU_core: - * 1: half_sync - * 0: full_sync - */ - ldr r0, =ASYNC_CONFIG - mov r1, #1 - str r1, [r0] - -#ifdef SET_MIU - ldr r0, =EXYNOS4_MIU_BASE - /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ - ldr r1, =0x20001507 - str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] - - /* Update MIU Configuration */ - ldr r1, =0x00000001 - str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] -#endif - /* DREX0 */ - ldr r0, =EXYNOS4_DMC0_BASE - - /* - * DLL Parameter Setting: - * Termination: Enable R/W - * Phase Delay for DQS Cleaning: 180' Shift - */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* - * ZQ Calibration - * Termination: Disable - * Auto Calibration Start: Enable - */ - ldr r1, =0xE3855703 - str r1, [r0, #DMC_PHYZQCONTROL] - - /* Wait ?us*/ - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - - /* Reset Force DLL Resyncronization */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Enable Differential DQS, DLL Off*/ - ldr r1, =0x71101008 - str r1, [r0, #DMC_PHYCONTROL0] - - /* Activate PHY DLL: DLL On */ - ldr r1, =0x7110100A - str r1, [r0, #DMC_PHYCONTROL0] - - /* Set DLL Parameters */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* DLL Start */ - ldr r1, =0x7110100B - str r1, [r0, #DMC_PHYCONTROL0] - - ldr r1, =0x00000000 - str r1, [r0, #DMC_PHYCONTROL2] - - /* Set Clock Ratio of Bus clock to Memory Clock */ - ldr r1, =0x0FFF301a - str r1, [r0, #DMC_CONCONTROL] - - /* - * Memor Burst length: 8 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 1 Cycle - */ - ldr r1, =0x00312640 - str r1, [r0, #DMC_MEMCONTROL] - - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x20e01323 - str r1, [r0, #DMC_MEMCONFIG0] - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x40e01323 - str r1, [r0, #DMC_MEMCONFIG1] - - /* Config Precharge Policy */ - ldr r1, =0xff000000 - str r1, [r0, #DMC_PRECHCONFIG] - - /* - * TimingAref, TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - ldr r1, =0x000000BB - str r1, [r0, #DMC_TIMINGAREF] - ldr r1, =0x4046654f - str r1, [r0, #DMC_TIMINGROW] - ldr r1, =0x46400506 - str r1, [r0, #DMC_TIMINGDATA] - ldr r1, =0x52000A3C - str r1, [r0, #DMC_TIMINGPOWER] - - /* Chip0: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00020000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00030000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00010002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00000328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - /* Chip0: ZQINIT */ - ldr r1, =0x0a000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - /* Chip1: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00120000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00130000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00110002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00100328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - /* Chip1: ZQINIT */ - ldr r1, =0x0a100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Wait ?us*/ - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* DREX1 */ - ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 - - /* - * DLL Parameter Setting: - * Termination: Enable R/W - * Phase Delay for DQS Cleaning: 180' Shift - */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* - * ZQ Calibration: - * Termination: Disable - * Auto Calibration Start: Enable - */ - ldr r1, =0xE3855703 - str r1, [r0, #DMC_PHYZQCONTROL] - - /* Wait ?us*/ - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - - /* Reset Force DLL Resyncronization */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Enable Differential DQS, DLL Off*/ - ldr r1, =0x71101008 - str r1, [r0, #DMC_PHYCONTROL0] - - /* Activate PHY DLL: DLL On */ - ldr r1, =0x7110100A - str r1, [r0, #DMC_PHYCONTROL0] - - /* Set DLL Parameters */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* DLL Start */ - ldr r1, =0x7110100B - str r1, [r0, #DMC_PHYCONTROL0] - - ldr r1, =0x00000000 - str r1, [r0, #DMC_PHYCONTROL2] - - /* Set Clock Ratio of Bus clock to Memory Clock */ - ldr r1, =0x0FFF301a - str r1, [r0, #DMC_CONCONTROL] - - /* - * Memor Burst length: 8 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 1 Cycle - */ - ldr r1, =0x00312640 - str r1, [r0, #DMC_MEMCONTROL] - - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x20e01323 - str r1, [r0, #DMC_MEMCONFIG0] - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x40e01323 - str r1, [r0, #DMC_MEMCONFIG1] - - /* Config Precharge Policy */ - ldr r1, =0xff000000 - str r1, [r0, #DMC_PRECHCONFIG] - - /* - * TimingAref, TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - ldr r1, =0x000000BB - str r1, [r0, #DMC_TIMINGAREF] - ldr r1, =0x4046654f - str r1, [r0, #DMC_TIMINGROW] - ldr r1, =0x46400506 - str r1, [r0, #DMC_TIMINGDATA] - ldr r1, =0x52000A3C - str r1, [r0, #DMC_TIMINGPOWER] - - /* Chip0: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00020000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00030000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00010002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00000328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - /* Chip 0: ZQINIT */ - ldr r1, =0x0a000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - /* Chip1: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00120000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00130000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00110002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00100328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - /* Chip1: ZQINIT */ - ldr r1, =0x0a100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Wait ?us*/ - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* turn on DREX0, DREX1 */ - ldr r0, =EXYNOS4_DMC0_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #DMC_CONCONTROL] - - ldr r0, =EXYNOS4_DMC1_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #DMC_CONCONTROL] - - mov pc, lr diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c deleted file mode 100644 index 072f161..0000000 --- a/board/samsung/origen/mmc_boot.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include<common.h> -#include<config.h> - -/* -* Copy U-boot from mmc to RAM: -* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains -* Pointer to API (Data transfer from mmc to ram) -*/ -void copy_uboot_to_ram(void) -{ - u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; - - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); -} - -void board_init_f(unsigned long bootflag) -{ - __attribute__((noreturn)) void (*uboot)(void); - copy_uboot_to_ram(); - - /* Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_TEXT_BASE; - (*uboot)(); - /* Never returns Here */ -} - -/* Place Holders */ -void board_init_r(gd_t *id, ulong dest_addr) -{ - /* Function attribute is no-return */ - /* This Function never executes */ - while (1) - ; -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index f2c32ee..9412e37 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(BOARD).o

-SOBJS := lowlevel_init.o - -COBJS := clock_init.o -COBJS += dmc_common.o dmc_init_ddr3.o COBJS += smdk5250_spl.o

ifndef CONFIG_SPL_BUILD @@ -38,14 +34,10 @@ COBJS += smdk5250.o endif endif

-ifdef CONFIG_SPL_BUILD -COBJS += spl_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS))

-ALL := $(obj).depend $(LIB) +ALL := $(obj).depend $(LIB)

all: $(ALL)

diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile index 56e0c16..c4cd0a3 100644 --- a/board/samsung/smdkv310/Makefile +++ b/board/samsung/smdkv310/Makefile @@ -24,18 +24,12 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(BOARD).o

-SOBJS := mem_setup.o -SOBJS += lowlevel_init.o ifndef CONFIG_SPL_BUILD COBJS += smdkv310.o endif

-ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS))

ALL := $(obj).depend $(LIB)

diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S deleted file mode 100644 index 31e0e2e..0000000 --- a/board/samsung/smdkv310/lowlevel_init.S +++ /dev/null @@ -1,414 +0,0 @@ -/* - * Lowlevel setup for SMDKV310 board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - -#define MEM_DLLl_ON - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - push {lr} - - /* r5 has always zero */ - mov r5, #0 - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* check reset status */ - ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7 - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in ram, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x00ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_asm_init - -1: - /* for UART */ - bl uart_asm_init - bl arch_cpu_init - bl tzpc_init - pop {pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_asm_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0 - - /* r1 = physical address of exynos4210_cpu_resume function */ - ldr r1, [r0] - - /* Jump to kernel*/ - mov pc, r1 - nop - nop - -/* - * system_clock_init: Initialize core clock and bus clock. - * void system_clock_init(void) - */ -system_clock_init: - push {lr} - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =0x0101 - ldr r2, =0x14200 @CLK_SRC_CPU - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -2: subs r1, r1, #1 - bne 2b - - ldr r1, =0x00 - ldr r2, =0x0C210 @CLK_SRC_TOP0 - str r1, [r0, r2] - - ldr r1, =0x00 - ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET - str r1, [r0, r2] - - /* DMC */ - ldr r1, =0x00 - ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_LEFTBUS */ - ldr r1, =0x00 - ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_RIGHTBUS */ - ldr r1, =0x00 - ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =0x066666 - ldr r2, =0x0C240 @ CLK_SRC_FSYS - str r1, [r0, r2] - - /* UART[0:4], PWM: SCLKMPLL(6) */ - ldr r1, =0x06666666 - ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -3: subs r1, r1, #1 - bne 3b - - /* - * CLK_DIV_CPU0: - * - * PCLK_DBG_RATIO[20] 0x1 - * ATB_RATIO[16] 0x3 - * PERIPH_RATIO[12] 0x3 - * COREM1_RATIO[8] 0x7 - * COREM0_RATIO[4] 0x3 - */ - ldr r1, =0x0133730 - ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */ - ldr r1, =0x03 - ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_DMC0: - * - * CORE_TIMERS_RATIO[28] 0x1 - * COPY2_RATIO[24] 0x3 - * DMCP_RATIO[20] 0x1 - * DMCD_RATIO[16] 0x1 - * DMC_RATIO[12] 0x1 - * DPHY_RATIO[8] 0x1 - * ACP_PCLK_RATIO[4] 0x1 - * ACP_RATIO[0] 0x3 - */ - ldr r1, =0x13111113 - ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_DMC1: - * - * DPM_RATIO[24] 0x1 - * DVSEM_RATIO[16] 0x1 - * PWI_RATIO[8] 0x1 - */ - ldr r1, =0x01010100 - ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_LEFRBUS: - * - * GPL_RATIO[4] 0x1 - * GDL_RATIO[0] 0x3 - */ - ldr r1, =0x013 - ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_RIGHTBUS: - * - * GPR_RATIO[4] 0x1 - * GDR_RATIO[0] 0x3 - */ - ldr r1, =0x013 - ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_TOP: - * - * ONENAND_RATIO[16] 0x0 - * ACLK_133_RATIO[12] 0x5 - * ACLK_160_RATIO[8] 0x4 - * ACLK_100_RATIO[4] 0x7 - * ACLK_200_RATIO[0] 0x3 - */ - ldr r1, =0x05473 - ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET - str r1, [r0, r2] - - /* MMC[0:1] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C544 @ CLK_DIV_FSYS1 - str r1, [r0, r2] - - /* MMC[2:3] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C548 @ CLK_DIV_FSYS2 - str r1, [r0, r2] - - /* MMC4 */ - ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C54C @ CLK_DIV_FSYS3 - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -4: subs r1, r1, #1 - bne 4b - - /* - * CLK_DIV_PERIL0: - * - * UART5_RATIO[20] 8 - * UART4_RATIO[16] 8 - * UART3_RATIO[12] 8 - * UART2_RATIO[8] 8 - * UART1_RATIO[4] 8 - * UART0_RATIO[0] 8 - */ - ldr r1, =0x774777 - ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET - str r1, [r0, r2] - - /* SLIMBUS: ???, PWM */ - ldr r1, =0x8 - ldr r2, =0x0C55C @ CLK_DIV_PERIL3 - str r1, [r0, r2] - - /* Set PLL locktime */ - ldr r1, =0x01C20 - ldr r2, =0x014000 @APLL_LOCK_OFFSET - str r1, [r0, r2] - ldr r1, =0x01C20 - ldr r2, =0x014008 @MPLL_LOCK_OFFSET - str r1, [r0, r2] - ldr r1, =0x01C20 - ldr r2, =0x0C010 @EPLL_LOCK_OFFSET - str r1, [r0, r2] - ldr r1, =0x01C20 - ldr r2, =0x0C020 @VPLL_LOCK_OFFSET - str r1, [r0, r2] - - /* - * APLL_CON1: - * - * APLL_AFC_ENB[31] 0x1 - * APLL_AFC[0] 0xC - */ - ldr r1, =0x8000000C - ldr r2, =0x014104 @APLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * APLL_CON0: - * - * APLL_MDIV[16] 0xFA - * APLL_PDIV[8] 0x6 - * APLL_SDIV[0] 0x1 - */ - ldr r1, =0x80FA0601 - ldr r2, =0x014100 @APLL_CON0_OFFSET - str r1, [r0, r2] - - /* - * MPLL_CON1: - * - * MPLL_AFC_ENB[31] 0x1 - * MPLL_AFC[0] 0x1C - */ - ldr r1, =0x0000001C - ldr r2, =0x01410C @MPLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * MPLL_CON0: - * - * MPLL_MDIV[16] 0xC8 - * MPLL_PDIV[8] 0x6 - * MPLL_SDIV[0] 0x1 - */ - ldr r1, =0x80C80601 - ldr r2, =0x014108 @MPLL_CON0_OFFSET - str r1, [r0, r2] - - /* EPLL */ - ldr r1, =0x0 - ldr r2, =0x0C114 @EPLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * EPLL_CON0: - * - * EPLL_MDIV[16] 0x30 - * EPLL_PDIV[8] 0x3 - * EPLL_SDIV[0] 0x2 - */ - ldr r1, =0x80300302 - ldr r2, =0x0C110 @EPLL_CON0_OFFSET - str r1, [r0, r2] - - /* - * VPLL_CON1: - * - * VPLL_MRR[24] 0x11 - * VPLL_MFR[16] 0x0 - * VPLL_K[0] 0x400 - */ - ldr r1, =0x11000400 - ldr r2, =0x0C124 @VPLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * VPLL_CON0: - * - * VPLL_MDIV[16] 0x35 - * VPLL_PDIV[8] 0x3 - * VPLL_SDIV[0] 0x2 - */ - ldr r1, =0x80350302 - ldr r2, =0x0C120 @VPLL_CON0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x30000 -3: subs r1, r1, #1 - bne 3b - - pop {pc} -/* - * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. - * void uart_asm_init(void) - */ - .globl uart_asm_init -uart_asm_init: - - /* setup UART0-UART3 GPIOs (part1) */ - mov r0, r7 - ldr r1, =0x22222222 - str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET - ldr r1, =0x00222222 - str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET - - ldr r0, =EXYNOS4_UART_BASE - add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET - - ldr r1, =0x3C5 - str r1, [r0, #0x4] - ldr r1, =0x111 - str r1, [r0, #0x8] - ldr r1, =0x3 - str r1, [r0, #0x0] - ldr r1, =0x35 - str r1, [r0, #0x28] - ldr r1, =0x4 - str r1, [r0, #0x2c] - - mov pc, lr - nop - nop - nop diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S deleted file mode 100644 index d3b6265..0000000 --- a/board/samsung/smdkv310/mem_setup.S +++ /dev/null @@ -1,365 +0,0 @@ -/* - * Memory setup for SMDKV310 board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> - -#define SET_MIU - -#define MEM_DLL - -#ifdef CONFIG_CLK_800_330_165 -#define DRAM_CLK_330 -#endif -#ifdef CONFIG_CLK_1000_200_200 -#define DRAM_CLK_200 -#endif -#ifdef CONFIG_CLK_1000_330_165 -#define DRAM_CLK_330 -#endif -#ifdef CONFIG_CLK_1000_400_200 -#define DRAM_CLK_400 -#endif - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - - /* - * Async bridge configuration at CPU_core: - * 1: half_sync - * 0: full_sync - */ - ldr r0, =0x10010350 - mov r1, #1 - str r1, [r0] - -#ifdef SET_MIU - ldr r0, =EXYNOS4_MIU_BASE @0x10600000 -#ifdef CONFIG_MIU_1BIT_INTERLEAVED - ldr r1, =0x0000000c - str r1, [r0, #0x400] @MIU_INTLV_CONFIG - ldr r1, =0x40000000 - str r1, [r0, #0x808] @MIU_INTLV_START_ADDR - ldr r1, =0xbfffffff - str r1, [r0, #0x810] @MIU_INTLV_END_ADDR - ldr r1, =0x00000001 - str r1, [r0, #0x800] @MIU_MAPPING_UPDATE -#endif -#ifdef CONFIG_MIU_2BIT_INTERLEAVED - ldr r1, =0x2000150c - str r1, [r0, #0x400] @MIU_INTLV_CONFIG - ldr r1, =0x40000000 - str r1, [r0, #0x808] @MIU_INTLV_START_ADDR - ldr r1, =0xbfffffff - str r1, [r0, #0x810] @MIU_INTLV_END_ADDR - ldr r1, =0x00000001 - str r1, [r0, #0x800] @MIU_MAPPING_UPDATE -#endif -#ifdef CONFIG_MIU_LINEAR - ldr r1, =0x40000000 - str r1, [r0, #0x818] @MIU_SINGLE_MAPPING0_START_ADDR - ldr r1, =0x7fffffff - str r1, [r0, #0x820] @MIU_SINGLE_MAPPING0_END_ADDR - ldr r1, =0x80000000 - str r1, [r0, #0x828] @MIU_SINGLE_MAPPING1_START_ADDR - ldr r1, =0xbfffffff - str r1, [r0, #0x830] @MIU_SINGLE_MAPPING1_END_ADDR] - ldr r1, =0x00000006 - str r1, [r0, #0x800] @MIU_MAPPING_UPDATE -#endif -#endif - /* DREX0 */ - ldr r0, =EXYNOS4_DMC0_BASE @0x10400000 - - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0xE3855703 - str r1, [r0, #0x44] @DMC_PHYZQCONTROL - - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0x71101008 - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0x7110100A - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0x7110100B - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - - ldr r1, =0x00000000 - str r1, [r0, #0x20] @DMC_PHYCONTROL2 - - ldr r1, =0x0FFF301a - str r1, [r0, #0x00] @DMC_CONCONTROL - ldr r1, =0x00312640 - str r1, [r0, #0x04] @DMC_MEMCONTROL] - -#ifdef CONFIG_MIU_LINEAR - ldr r1, =0x40e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x60e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */ - ldr r1, =0x20e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x40e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#endif - - ldr r1, =0xff000000 - str r1, [r0, #0x14] @DMC_PRECHCONFIG - - ldr r1, =0x000000BC - str r1, [r0, #0x30] @DMC_TIMINGAREF - -#ifdef DRAM_CLK_330 - ldr r1, =0x3545548d - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x45430506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x4439033c - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif -#ifdef DRAM_CLK_400 - ldr r1, =0x4046654f - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x56500506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x5444033d - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif - ldr r1, =0x07000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - ldr r1, =0x00020000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00030000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00010002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00000328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - ldr r1, =0x0a000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - ldr r1, =0x07100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - ldr r1, =0x00120000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00130000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00110002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00100328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - ldr r1, =0x0a100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* DREX1 */ - ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 - - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0xE3855703 - str r1, [r0, #0x44] @DMC_PHYZQCONTROL - - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0x71101008 - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0x7110100A - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0x7110100B - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - - ldr r1, =0x00000000 - str r1, [r0, #0x20] @DMC_PHYCONTROL2 - - ldr r1, =0x0FFF301a - str r1, [r0, #0x00] @DMC_CONCONTROL - ldr r1, =0x00312640 - str r1, [r0, #0x04] @DMC_MEMCONTROL] - -#ifdef CONFIG_MIU_LINEAR - ldr r1, =0x40e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x60e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */ - ldr r1, =0x20e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x40e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#endif - - ldr r1, =0xff000000 - str r1, [r0, #0x14] @DMC_PRECHCONFIG - - ldr r1, =0x000000BC - str r1, [r0, #0x30] @DMC_TIMINGAREF - -#ifdef DRAM_CLK_330 - ldr r1, =0x3545548d - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x45430506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x4439033c - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif -#ifdef DRAM_CLK_400 - ldr r1, =0x4046654f - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x56500506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x5444033d - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif - - ldr r1, =0x07000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - ldr r1, =0x00020000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00030000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00010002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00000328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - ldr r1, =0x0a000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - ldr r1, =0x07100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - ldr r1, =0x00120000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00130000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00110002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00100328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - ldr r1, =0x0a100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* turn on DREX0, DREX1 */ - ldr r0, =0x10400000 @APB_DMC_0_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #0x00] @DMC_CONCONTROL - - ldr r0, =0x10410000 @APB_DMC_1_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #0x00] @DMC_CONCONTROL - - mov pc, lr diff --git a/board/samsung/smdkv310/mmc_boot.c b/board/samsung/smdkv310/mmc_boot.c deleted file mode 100644 index d3fc18d..0000000 --- a/board/samsung/smdkv310/mmc_boot.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include<common.h> -#include<config.h> - -/* -* Copy U-boot from mmc to RAM: -* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains -* API (Data transfer from mmc to ram) -*/ -void copy_uboot_to_ram(void) -{ - u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR; - - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); -} - -void board_init_f(unsigned long bootflag) -{ - __attribute__((noreturn)) void (*uboot)(void); - copy_uboot_to_ram(); - - /* Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_TEXT_BASE; - (*uboot)(); - /* Never returns Here */ -} - -/* Place Holders */ -void board_init_r(gd_t *id, ulong dest_addr) -{ - /*Function attribute is no-return*/ - /*This Function never executes*/ - while (1) - ; -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) -{ -} diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 6c7a052..b32d1bd 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -104,6 +104,7 @@

#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SKIP_LOWLEVEL_INIT

/* PWM */ #define CONFIG_PWM @@ -137,6 +138,7 @@ #define CONFIG_USB_STORAGE

/* USB boot mode */ +#define CONFIG_USB_BOOTING #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 @@ -152,6 +154,8 @@ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030

+#define CONFIG_SPL_LIBCOMMON_SUPPORT + /* specific .lds file */ #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x02023400 @@ -229,7 +233,7 @@ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)

-#define OM_STAT (0x1f << 1) +#define CONFIG_SPI_BOOTING #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)

@@ -241,7 +245,7 @@

#define CONFIG_IRAM_STACK 0x02050000

-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK

/* I2C */ #define CONFIG_SYS_I2C_INIT_BOARD diff --git a/include/configs/origen.h b/include/configs/origen.h index f71a463..fd7d667 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -68,6 +68,8 @@ #define CONFIG_BAUDRATE 115200 #define EXYNOS4_DEFAULT_UART_OFFSET 0x020000

+#define CONFIG_SKIP_LOWLEVEL_INIT + /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC #define CONFIG_MMC @@ -148,7 +150,10 @@ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) #define CONFIG_DOS_PARTITION 1

-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" +#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + +#define CONFIG_SYS_INIT_SP_ADDR 0x02040000

/* U-boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000 @@ -157,4 +162,5 @@

/* Enable devicetree support */ #define CONFIG_OF_LIBFDT + #endif /* __CONFIG_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index db78127..38ba292 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -58,6 +58,7 @@ /* Handling Sleep Mode*/ #define S5P_CHECK_SLEEP 0x00000BAD #define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000

/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) @@ -94,6 +95,7 @@

/* MMC SPL */ #define CONFIG_SPL +#define CONFIG_SKIP_LOWLEVEL_INIT #define COPY_BL2_FNPTR_ADDR 0x00002488

#define CONFIG_SPL_TEXT_BASE 0x02021410 @@ -147,7 +149,10 @@ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) #define CONFIG_DOS_PARTITION 1

-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" +#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + +#define CONFIG_SYS_INIT_SP_ADDR 0x02040000

/* U-boot copy size from boot Media to DRAM.*/ #define COPY_BL2_SIZE 0x80000