If reset-gpio is defined by device-tree use that if CONFIG_PCIE_IMX_PERST_GPIO is not defined. Note that after this the following boards which define CONFIG_PCIE_IMX_PERST_GPIO in their board header file as well as their device-tree should be able to remove CONFIG_PCIE_IMX_PERST_GPIO without consequence:
- mx6sabresd
- mx6sxsabresd
- novena
- tbs2910
- vining_2000
Note that the ge_bx50v3 board uses CONFIG_PCIE_IMX_PERST_GPIO and does not have reset-gpios defined it it's pcie node in the dt thus removing CONFIG_PCIE_IMX_PERST_GPIO globally can't be done until that board adds reset-gpios. Cc: Ian Ray ian.ray@ge.com (maintainer:GE BX50V3 BOARD) Cc: Sebastian Reichel sebastian.reichel@collabora.com (maintainer:GE BX50V3 BOARD) Cc: Fabio Estevam festevam@gmail.com (maintainer:MX6SABRESD BOARD) Cc: Marek Vasut marex@denx.de (maintainer:NOVENA BOARD) Cc: Soeren Moch smoch@web.de (maintainer:TBS2910 BOARD) Cc: Silvio Fricke open-source@softing.de (maintainer:VINING_2000 BOARD) Signed-off-by: Tim Harvey tharvey@gateworks.com
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic