[U-Boot-Users] USB device configuration

Hello,

during my PXA27x USB device support developing adventure I notice that usbtty calls the functions:

udc_init: PXA27x usbd start udc_setup_ep: setting up endpoint addr 0 udc_enable: enable device a2077f74, status 0 udc_connect: udc_setup_ep: setting up endpoint addr 1 udc_setup_ep: setting up endpoint addr 82 udc_setup_ep: setting up endpoint addr 83

Looking at PXA27x manual I read that I have to setup the endpoints and __then__ enable UDC for normal operations! But looking above I see that u-boot calls before the udc_enable() and then the function udc_setup_ep()...

There are something wrong or I haven't understood well how UDC support works? =:-o

Thanks,

Rodolfo