Tom
On 03/31/2016 09:11 AM, Tom Rini wrote:
On Thu, Mar 31, 2016 at 07:42:39AM -0500, Dan Murphy wrote:
Not all devices use the same internal delay or fifo depth. Add the ability to set the internal delay for rx or tx and the fifo depth via the config file. If the value is not set in the config file then set the delay to the default.
Signed-off-by: Dan Murphy dmurphy@ti.com
drivers/net/phy/ti.c | 71 ++++++++++++++++++++++++++++++++---- include/dt-bindings/net/ti-dp83867.h | 35 ++++++++++++++++++
I don't think this is taking things down the right path. If it's a DT binding, it comes from the device tree (which is fine and good!) but that means the binding needs to meet the usual reviews and not just come in via U-Boot like this. We really don't want to add a DT binding that gets values from the config.h file.
This binding file I created that is already part of the Mainline kernel. I just brought it in to use #defines and once the drivers are ported to use DT then the bindings will already be available.
And the config.h should be getting its values from the dt-binding.
Dan