13 Oct
2003
13 Oct
'03
4:17 p.m.
Hello All,
I have a MPC852T based board. I have configured SCC4 ETHERNET register and I have a PHY ( Broadcom 5222 ) chip as a PHY support.
I am able to do a SCC loopback, but the data is not going out from the PHY when I diable the loopback.
How do I access the PHY from SCC "scc.c" driver ?? do I have to do this anyway ?
The PHY is getting accessed from "MII" i.e I am able to do "mii read/write" The Dual BCM Phy registers are located at 0x10 and 0x11 offset. of PHY.
Warm Regards Raghu.
__________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com