On 29.07.19 09:12, Baruch Siach wrote:
SPL now automatically selects the correct U-Boot image offset for both eMMC and SD card. No need to tweak CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore.
Signed-off-by: Baruch Siach baruch@tkos.co.il
board/solidrun/clearfog/README | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 6171ce66f4f8..9375be84957a 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -20,12 +20,6 @@ of "/dev/sdX" here! Install U-Boot on eMMC:
-The ROM loads the bootloader from eMMC first boot partition at offset 0. This -is unlike load from SD card that is at offset 512. As a result, the offset of -the main U-Boot image on the eMMC boot partition changes. Set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x140 for SPL to load U-Boot from -the correct location.
- To make SPL load the main U-Boot image from the eMMC boot partition enable eMMC boot acknowledgement and boot partition with the following U-Boot command:
Reviewed-by: Stefan Roese sr@denx.de
Thanks, Stefan