IFC-NOR and QSPI-NOR pins are muxed on SoC,so they cannot be accessed simultaneously, but IFC-NOR can be accessed along with SD-BOOT.
ls1088aqds_sdcard_ifc_defconfig: is defconfig for SD as boot source and IFC-NOR to be used as flash, this will be used to write IFC-NOR image on IFC flash. QSPI and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated by ls1088aqds_defconfig.
Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com --- depends upon: http://patchwork.ozlabs.org/project/uboot/list/?series=29287
v2: Remove hardcoded timing for sys, ddr clock Remove hardcoded timing for IFC Move unrelated code to different clean-up patch
arch/arm/dts/fsl-ls1088a-qds.dts | 37 ++++++++++++++++++++++ arch/arm/dts/fsl-ls1088a.dtsi | 5 +++ board/freescale/ls1088a/MAINTAINERS | 2 ++ configs/ls1088aqds_defconfig | 43 ++++++++++++++++++++++++++ configs/ls1088aqds_sdcard_ifc_defconfig | 54 +++++++++++++++++++++++++++++++++ include/configs/ls1088aqds.h | 12 +++++--- 6 files changed, 148 insertions(+), 5 deletions(-) create mode 100644 configs/ls1088aqds_defconfig create mode 100644 configs/ls1088aqds_sdcard_ifc_defconfig
diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts index 225c7c5..02000fc 100644 --- a/arch/arm/dts/fsl-ls1088a-qds.dts +++ b/arch/arm/dts/fsl-ls1088a-qds.dts @@ -19,6 +19,43 @@ }; };
+&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus", "fsl,ls1088aqds-fpga", + "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + bank-width = <1>; + device-width = <1>; + ranges = <0 2 0 0x100>; + }; +}; + &dspi { bus-num = <0>; status = "okay"; diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index f8f8654..b4a42cf 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -75,6 +75,11 @@ reg-names = "QuadSPI", "QuadSPI-memory"; num-cs = <4>; }; + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + };
usb0: usb3@3100000 { compatible = "fsl,layerscape-dwc3"; diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS index 371e5db..4d804d9 100644 --- a/board/freescale/ls1088a/MAINTAINERS +++ b/board/freescale/ls1088a/MAINTAINERS @@ -15,6 +15,8 @@ F: board/freescale/ls1088a/ F: include/configs/ls1088aqds.h F: configs/ls1088aqds_qspi_defconfig F: configs/ls1088aqds_sdcard_qspi_defconfig +F: configs/ls1088aqds_defconfig +F: configs/ls1088aqds_sdcard_ifc_defconfig
LS1088AQDS_QSPI_SECURE_BOOT BOARD M: Udit Agarwal udit.agarwal@nxp.com diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig new file mode 100644 index 0000000..acb9d7b --- /dev/null +++ b/configs/ls1088aqds_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088AQDS=y +CONFIG_SYS_TEXT_BASE=0x30100000 +# CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_FSL_IFC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_FSL_LS_PPA=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_CMD_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_USE_BOOTCOMMAND is not set diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig new file mode 100644 index 0000000..d415026 --- /dev/null +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -0,0 +1,54 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088AQDS=y +CONFIG_SYS_TEXT_BASE=0x80400000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_FSL_LS_PPA=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_PARTITIONS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_SD_BOOT=y +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_SPL=y +CONFIG_SPL_BUILD=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FSL_IFC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 1f2161b..1fd2286 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -27,7 +27,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #else -#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 @@ -41,6 +40,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 #else +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #endif @@ -89,13 +90,14 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TAVDS(0x6) | \ FTIM0_NOR_TEAHC(0x5)) #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1a) |\ + FTIM1_NOR_TRAD_NOR(0x1a) | \ FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x8) | \ + FTIM2_NOR_TCH(0x8) | \ + FTIM2_NOR_TWPH(0xe) | \ FTIM2_NOR_TWP(0x1c)) #define CONFIG_SYS_NOR_FTIM3 0x04000000 #define CONFIG_SYS_IFC_CCR 0x01000000