On 09/17/14 06:51, Simon Glass wrote:
Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an example.
Signed-off-by: Simon Glass sjg@chromium.org
Thanks for doing this. Acked-by: Igor Grinberg grinberg@compulab.co.il
Changes in v2:
- Use the correct namespace for the platform data
board/compulab/cm_fx6/cm_fx6.c | 10 ++++++++++ include/configs/cm_fx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+)
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 10e31b6..d79cd5f 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -9,11 +9,13 @@ */
#include <common.h> +#include <dm.h> #include <fsl_esdhc.h> #include <miiphy.h> #include <netdev.h> #include <fdt_support.h> #include <sata.h> +#include <serial_mxc.h> #include <asm/arch/crm_regs.h> #include <asm/arch/sys_proto.h> #include <asm/arch/iomux.h> @@ -509,3 +511,11 @@ u32 get_board_rev(void) return cl_eeprom_get_board_rev(); }
+static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = {
- .reg = (struct mxc_uart *)UART4_BASE,
+};
+U_BOOT_DEVICE(cm_fx6_serial) = {
- .name = "serial_mxc",
- .platdata = &cm_fx6_mxc_serial_plat,
+}; diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4..1f55150 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,6 +21,17 @@ #define CONFIG_MACH_TYPE 4273 #define CONFIG_SYS_HZ 1000
+#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM +#define CONFIG_CMD_DM
+#define CONFIG_DM_GPIO +#define CONFIG_CMD_GPIO
+#define CONFIG_DM_SERIAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif
/* Display information on boot */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO